Quote:
Originally Posted by Jaguartvr
Interesting that these wheels fit and on your other kit you had to flare the rear arches. I don't think Chris has changed the mould.
I seem to remember that the last set of wires were from an Aston and these are from a Jag.
Any chance next time you have the wheels of of taking a measurement as the wheels can be trued with the spokes for different offsets. If you place a flat 2x2 wooden batten on the front surface at the wheel centre and then take a measurement from the outer rim to the batten. That will give us all a measurement that we know works.
I have a set of Aston wheels in the garage, I will take the same measurement from mine. With this sort of information you could ask an Ebay seller this measurement so that you don't waste your money on a set of wires that sit too far in or out.
|
20170305_165547.jpg
holding the wood to the wheel the hubnut part is about 20mm proud of the rest of the wheel I suppose you could say a negative offset