its been a busy weekend I now have a full pedal box with breaks and steering and a heater getting posh now,lol
I ply lined the inside of the fire wall with 18mm wpb to give it some strength I figured as I will be bolting things to it it made sense to bond it on.
the steering was a pain in the backside to get right but I got there in the end.
DSCF0002.jpg
DSCF0023.jpg
the pedal box and servos are all mx5 it was a squeeze to get them in but I figure when the new gear box is fitted with the adapter plate the engine will move forward 2" that will give me the clearance.
DSCF0020.jpg
the servo was originally piped up on the right but I flipped the bracket and re-piped it on the left to give more room and make life easier
the new to me RX8 gearbox and freshly made prop shaft waiting to be fitted
DSCF0027.jpg
last job for the day I have glassed the air vents onto the back of the dashboard,the heater unit is Austin mini just happen to have one easy to fit and pipe up makes a change
DSCF0025.jpg