Im wondering anyone can help me with a fibreglass layup for a race car body im going to have to make.
Ive had to modify my current body, which now weighs a ton. So next is to make a mould and then a new engine cover, rear end.
Heres a picture of a similar rear end
http://motorsporttrader.com/en/ad-14...orts_2000.html
Anyhow what layup would you suggest, no carbon is allowed, so im thinking 200grm csm, followed by 300grm woven then more csm either 200/300/450 with localised core matt stiffening.
I would welcome any thoughts that you have.
Thanks
Mark