View Single Post
Old 18th February 2020, 02:11
deni deni is offline
Senior Member
Join Date: Jun 2015
Posts: 208
deni is on a distinguished road

Originally Posted by 1iTim View Post
Triumph! Pun intended! Springs from a local supplier. With the spax adjustable shocks from rimmer I can go 10" or 9" same height so I'll go with 10" 2 3/4 (70mm)ID 300lb/inch springs. Should give the bottom control arms level. I made 1/4" shims from aluminium for front camber but may not need them. I'll need to shim the steering rack about that too.
Hi Tim,

Can I just check please, you are using 300 lb springs? Are they going to be a bit stiff considering the car will be much lighter than Herald?

Thank you.
Reply With Quote