View Single Post
  #383  
Old 22nd April 2020, 09:57
Lucky@LeMans Lucky@LeMans is offline
Senior Member
 
Join Date: Aug 2012
Posts: 1,711
Lucky@LeMans is on a distinguished road
Default

Quote:
Originally Posted by Welshkiwi View Post
Hey guys,

making progress, Rear face of car is primed majority now so looks quite smart. Started work on the door mechanisms for the locks, came up with a "push rod" lathed and made up of aluminium. This will be bonded and jubilee clamped on the door handle push rod and will have a bush going through the car door skin and brackets etc for stability. "long key approach for protection of getting locked out.....

Some mock up pics.....

Door lock pusher

Door lock pusher 2

Mock Up Door push
You will need to cut a rectangular hole in the door skin so you can fit the extended tab above the pivot point . If you don't do this there won't be enough leverage to push the button to open the door ! If you have already cut the outer skin to take the handle you'll have a bit more work to sort it out ! That's what I did on my car !
Reply With Quote