View Single Post
  #48  
Old 28th June 2020, 17:13
andysharrock's Avatar
andysharrock andysharrock is offline
Senior Member
 
Join Date: Jun 2011
Location: sheffield
Posts: 564
andysharrock is on a distinguished road
Default

Huston we have a car on wheels hanging the frame from the underside of the chassis worked a treat I just need to nip the ends off the steel work job for tomorrow. The front of the chassis tucked tight into the front of the body allowing me to glass it in so it dose not move. I extended the rear chassis all the way to the body and run a length of box across the rear end. this gives me support for the boot floor but more so to give us some protection from the rear end also glassed it to the body. headlight buckets hit the crash rail on the chassis so going to have to trim the last 2" off both ends to fit the lights. relay need to find a mx5 so I can work out the inner working seat pedals etc but the boot can all go in now.
IMG_20200628_154556.jpg

IMG_20200628_154530.jpg

IMG_20200628_154537.jpg

IMG_20200628_154625.jpg

IMG_20200628_154544.jpg
Reply With Quote