Quote:
Originally Posted by GreatOldOne
High level tail lamps mounted:
The mounting saddles are made of 35mm aluminium bar that has been machined by yours truly at his engineering night class.
They're attached by a couple of stainless M4 cap head screws which are countersunk into the saddle. The lamp is held in place by the two M4 grub screws you can see on the back of each saddle.
I need to take them off and paint them satin black like the roll bar. I've toyed with the idea of polishing the aluminium up, but I think black would be better.
I need to chase the wires through the bar yet as well.
|
Well done they look really smart!
You'll have fun chasing the wires through the rollbar