View Single Post
  #401  
Old 24th September 2020, 06:43
Welshkiwi Welshkiwi is offline
Senior Member
 
Join Date: Aug 2017
Location: Auckland, New Zealand
Posts: 297
Welshkiwi is on a distinguished road
Default Very long time between posts.....Boot lock worked out

Hi all,

I have been working away through Covid chaos and with some "new balance" i.e. a 3 1/2 day work week have managed to get a bit done on the car. Optimistic that Certification is weeks away and not months....

Finally got the boot lock worked out, was brave and cut away access holes etc to allow me to frame it all up/access parts and it has worked out.

The photos tell a lot of it, but basically I am using the original BMW boot key tumbler (minus the central locking), the original lock mechanism upside down (on the boot lid) and the striker plate fixed to the car.

Took a while, but the photos are off the whole system working, boot shuts and locks and open with the button push. Need to finish off fixing it all in place and finishing the frame in the boot lid/covering the mechanism. The wiring for the boot lock is also being run in conduit fixed to the boot lid..... Only slight downside is I had to change the exterior with a panel to hide the depth of the lock, but will fair it all in and blend so it looks better.....Shutlines also have to be worked on as they are a bit out just now..... Here ya go.

IMG_20200924_171748

IMG_20200924_171758

IMG_20200924_171810

IMG_20200924_171826

IMG_20200924_171835

IMG_20200924_171851
Reply With Quote