View Single Post
Old 18th November 2012, 17:13
andrewhush andrewhush is offline
Join Date: Sep 2011
Location: Stanley, Durham
Posts: 90
andrewhush is on a distinguished road

After much dithering regarding the position of the pedal box I have cut and bonded in the ply bulkhead.

Next step is to move the door apertures back to get the screen and hood position correct relative to the seating position, i.e. my head below the highest point of the hood. Approx 6" back for the right hand side and a bit less for the left as the existing door opening is already further back.

Here goes!

And with the screen and hood template in place

Reply With Quote