Quote:
Originally Posted by ricola
Well I got the guy at Protocast to measure some, his measure 245x58mm which is what we need. The part number he has are: 81520-20730 and
81510-20730, for a pre face lift '94-'96 GT / ST202
His are made from moulds off the originals so it's a lense replacement job, but it is an exact replica so all markings etc are still present so that should be good enough for SVA!
Rich
|
Hi Rich.
I checked the parts lists again and guess what - it looks like Toyota carried forward the front indicators from the ST180 onto the ST220 (the 4 headlight model). Got pretty much the same part number (81510 and 81520 right and left) and I believe the last few digits are sourcing identifiers.
Has anyone looked at the 4 headlight Celica to compare? It would certainly mean the lamps are a lot easier to get than has been suggested.
Your guys moulding from the originals will have an E Approved marking just from the mould
Doesn't mean they conform to whatever the hell E Approved means but I doubt any SVA or MOT will ever know!
In passing, the Ebay offerings seem cheaper than Protocast.
Regards
Greg