Quote:
Originally Posted by Mike
There is an interesting back story here which may prove useful to know......
My rose joint solution was to source a 10mm female rose joint and weld a 3/8" x 20mm long collar collar to it.
See post 653 in this thread. Whilst I am 100% confident of its structure (it operates only in compression), I felt others may want an off the shelf solution, - hence the Anglia Bearing 3/8" male threaded 10mm rose joint and a 3/8" collar, which all simply screws together.
If this is no longer available off the shelf, I would be happy to get a 10mm rose joint professionally welded to a 3/8" collar, as per my own arrangement, for anyone wanting to go down this route. Send me a PM.
Mike
|
Hi Mike.
Yes I would be interested in two please. Have sent you a couple of PMs, but on the other forum
Peter.