Quote:
Originally Posted by DerbyDreamer
Just missing the bolt to hold it to the manifold so thought I would check with the wise before I knacker the thread - a 1/4 UNF only goes in one turn so I'm thinking UNC for castings?
Hoping someone will know....
Richard
|
Hi Richard, I can't find an exact reference for the accelerator bracket bolt specification, but it's likely to be the same as on the Spitfire. That uses two HU755 setscrews, which are 1/4x5/8 UNC. That would explain why your 1/4 UNF jams in the thread.
Rimmer Bros. have them in stock at 37p plus 13p for the locking washer -
https://rimmerbros.com/Item--i-GRID005608