View Single Post
  #178  
Old 14th March 2019, 17:13
deni deni is offline
Senior Member
 
Join Date: Jun 2015
Posts: 290
deni is on a distinguished road
Default

As I could not trial fit the body this time, I have continued with welding the additional bits on the frame.

I have added the reinforcement to minimize the movement of the pedals plate and done the same on opposite side.


IMG_1727.jpg


IMG_1729.jpg


IMG_1731.jpg


The frame was delivered without the mounting points to the back of the chassis, so I've added those too. This will make everything a bit stiffer and help carrying the weight of the petrol tank when filled with the fuel.


IMG_1732.jpg


IMG_1733.jpg


I will weld it all to the frame later on, as I would like to take the frame of the chassis to be able to turn it upside down to make it easier to weld the bottom side of all added bits.

Last edited by deni; 14th March 2019 at 17:16.. Reason: addint the additional text at the end
Reply With Quote