Quote:
Originally Posted by seanick
I think you simply go for the minimum offset.
Eg I have 6.5j rims with a 43ET, but a 20mm spacer on the front, which brings the ET down to 23mm.
If you have 8" rims that will be about an inch wider each side than yr existing 6" rims. I would not go wider or less offset as it may look good but you may get bump steer and there may be clearance probs ob full lock.
|
Sorry, I was just looking at wheels on ebay.......
Nick is right about the front, I would go with the 15x7 ET20. The rear needs to be the 15x8, 4x100 PCD, ET5 with a 25 mm spacer. But I will double check for you, before you go ahead and order anything.
This is a great link:
http://www.gtsparkplugs.com/WheelOffsetCalc.html