A quick re-cap of some engine work I did last November......
Quote:
Originally Posted by peterux
|
So after a bit of a pause I finally got round to re-assembling my engine after the refurbishment of the VANOS unit. Before tightening the exhaust camshaft sprocket bolts you need to pretension the timing chain with a tool that replaces the primary chain tensioner.
The chain tensioning tool has to be tightened to 11 inch lbs.
So I hung a 1 pound kitchen scales weight 11 inches from the pivot.
Engine assembly by
Sabrebuilder, on Flickr
I've fitted a new water pump, thermostat and thermostat cover.
Engine assembly by
Sabrebuilder, on Flickr
And I've re-installed the sump.....
Engine assembly by
Sabrebuilder, on Flickr
Engine assembly by
Sabrebuilder, on Flickr
The sump and head cover will be painted when the weather warms up as it's currently too cold.
......peter