Having another try at the centre console.
The main part does it's job but it is disjointed so I thought I'd do something along the sides.
As usual I'm using my haphazard make it up as I go along with what's lying about method.
Plan 'A' failed as the piece of ribbed alloy I found wasn't big enough
Plan 'B' nearly failed as I cut the next piece of alloy for the n/s wrong but fortunately it will fit the o/s.
Then I covered it with the same vinyl as I used on the doors.
Here's the n/s panel.
Will try to do a bit more later in the week.