Week 4......and not alot has happened due to serious dose of Man Flu. Not able to cope with the evening sessions!
Fitted some 6mm ply to the rear.
made a patten like this......uding a hot melt glue gun to hold the pattern together...[IMG]
[/IMG].....
Transferd it like this.....
[IMG]
[/IMG]
The ends were done buy rough cutting a bit of ply then using the boatbuilder method to take a patten. A small piece of wood, parraelle sided, is used as a 'dummy stick' to transfer a mark on to the ply (spile board). Then to transfer the marks fix the ply Patten to the finished ply and using the dummy stick again reverse the process. This method is used for everything from planks to locker bottoms, and can be mm accurate.
[IMG]
[/IMG][IMG]
[/IMG]
[IMG]
[/IMG]
in this case it nearly worked!