Had the wire wheels fitted today. Took longer than expected. First, the tyre shop couldn't get my tyres onto my wheels, Nangkang R215/75R15. It was tight, but they managed. Then there was a redundant bracket under each front wheel arch that needed grinding off - as it was catching the tyre on full lock. I was in there for 2 1/2 hours in total.
I drove it home, about 2 miles, and I could hear the tyres catching on the front right and rear left. Mainly when I turned the wheel and went over bumps. It was a horrible noise - and I could smell rubber
After a drive, the body had settled on the tyres. Too much for my liking. I filed down the inner arch a little where it was catching. The weather was rubbish today, sun, then rain, a bit of sun, then hail. I managed to get a few photos of the wheels in between.