On the wing extenders, I fitted mine on to a Mk2. I didn't flatten the lip, just bolted through it. I also bolted through the bar at the top to give the extenders some extra support.
The kit I had was for the Mk1 so when trying to fit the front end I had to take out some quite large lumps of GRP to get it to sit where I wanted. I think the Mk2 kit has addressed these problems.
On the roof, can't help as I made the convertible although when I fitted the hardtop I just cut the rubbers and tucked them back in then stuck the bit I had cut out across the middle to make it look finished.
|