It is the same as my profile picture, click it and it will enlarge. These are of the earlier springs but they were also -30 and the picture was taken on the day they were fitted so hadn't yet collapsed.
The springs, tyre size and wheels all suddenly came together and it all makes it look so much better. The car isn't garaged but since changing the wheels and suspension it is impossible to take it out without someone stopping to admire it.
Currently working on a full interior. Dash (not Tributes) was awfull and only fitted where it touched (which wasn't in many places) is just about fitted, just doing a final modification to the mould. The speedo and rev counter also looked too flat so they have been adjusted and the top cowls made longer. I have also managed to incorporate the heater controls and am very pleased with how they have come out. I think the dash has taken more hours than the rest of the car. It has almost cost as much as the kit! No pictures yet as it is going to a trimmer to have it leather covered. I am also waiting for the mounting plinth for the small central instruments to come back from CNC. Should look stunning, well it bloody well should do after all the work.
Also bowed to popular pressure and removed the spare wheel so a twin stainless exhaust could be fitted. Kept the centre box and just pipe from there back, sounds great but not obnoxious. I have a phobia about not having a spare so the original space-saver lives in the boot. The car now obviously has knock-on hubs but a bit of forward thinking goes a long way. The hubs are held on by the original wheel bolts (shortened by 3mm) this way if you get a puncture, remove the wire wheel and hub and then fit the space saver using the original nuts. I have had a 3 earded spinner removing tool made up with a 2 foot
breaker bar so it is very easy to remove the spinners and nuts. I then have a locking bar that sits over 2 wheel bolts to lock the wheel so you can stop the hub from turning when undoing the bolts.
Sorry, didn't mean to hijack your excellent build thread.
Last edited by Jaguartvr; 3rd November 2019 at 19:09..
|