View Single Post
  #16  
Old 9th December 2016, 17:19
Mick O'Malley Mick O'Malley is offline
Senior Member
 
Join Date: Nov 2012
Posts: 845
Mick O'Malley is on a distinguished road
Talking Last Few Bits

I've now fitted the door windows. They were a bit of a fiddle as there was no room on the inside to pass a bolt outwards. I locktited the dome nuts I used on the windscreen to 40mm M5 machine screws and cut each to length as appropriate before securing them with slimline nuts. I then fabricated two little flip-up guides bolted to the corners of the windscreen to keep everything in line. A nine-point turn was required in the confines of the garden to get the beast facing out. As the perspex covers distort the headlamp beams I decided to leave them off until after the MOT. The grille also has to be left off as the mouth provides access for their back nuts.

Post MOT I need to tidy up the footwells and touch in a few blemishes here and there before using her. Lets hope for plenty of fine weather in '17

Regards, Mick
Attached Images
File Type: jpg DSCN0040.jpg (83.4 KB, 170 views)
File Type: jpg DSCN0041.jpg (82.1 KB, 147 views)

Last edited by Mick O'Malley; 10th March 2021 at 13:18.. Reason: Typo
Reply With Quote