Quote:
Originally Posted by GreatOldOne
No, no spring - and using the clevis.
I've spoken to Mike, and will be adding a spring and swapping to a rose joint ASAP.
|
............and try to align the servo push rod perfectly central when it is finally connected to your pedal: in the horizontal plane..... to remove the angle created by the Marlin pedal box arrangement.
It appears the servo seal on the chrome and zinc servos is very sensitive.
Note for other users:
The black powder coated dual servo is a different make/design to the chrome and zinc servos, and does not appear to be affected by the binding problem.