The long driveshaft's are still an on-going issue I've had to send for a 5/8 unf die to repair the threads,
in the mean time I fitted the spacers to the front wheels and they look much better now.
sorry about the rubbish photo not enough room in the garage.
this of course caused it's own problem the tyres were now catching on the lower wheel arch these were cut back and a new lip made with glass paste.
\I find this shooooo much easier than fafing about with matting, resin, and hardener.
I suspect now that I've moved the wheels out a bit I can take a bit of the steering lock out
hmmmm