View Single Post
  #5  
Old 28th March 2019, 07:51
Paul L's Avatar
Paul L Paul L is offline
Senior Member
 
Join Date: Feb 2012
Location: Wembley, London
Posts: 5,056
Paul L is on a distinguished road
Default

R166ers – Welcome to the forum.

Apologies if you’ve seen these already, but there is a basic MX250 build manual here:
http://www.madabout-kitcars.com/foru...ead.php?t=3943

You will also find links to various MX250 builds in this thread (keep paging down).
http://www.madabout-kitcars.com/foru...ead.php?t=4623

Note: Unfortunately, there have been technical problems with some photo links on old threads.

Contact Tribute directly to confirm they will ship to Luxembourg.
( The kit is packed on a pallet for delivery. )

This is the two-part bonding paste I used to join fibreglass panels to metal on my (non-Tribute) build.
( Where you add a separate catalyst to activate it. )



This was a rough test piece I made to see how it worked and check the strength of the join.



By chance, I found this piece recently and the join is still rock solid some 3.5 years later.

Good luck, Paul.
Reply With Quote