Geometry Set Up

[bigrich]

Hi...

In between wrestling with the Bodywork I'm setting up the suspension, ride height etc......but I haven't got any reference info. I've seen a thread about an e-mail from Marlin with info on but I don't have this.

What I'm after (if anyone can help) is some reference settings for:-

Ride Height Front and rear (measured from floor to bottom of chassis)
Damper 'clics' settings front and rear
Tyre pressures front and rear (15" rims)
Spring lengths front and rear

..I'll set front and rear camber at vertical and front and rear toe at 0 (well maybe 1mm on front)

Any one help?

Thanks

Rich

[marlinturbo]

Hi Rich,

What engine do you have?

John

[bigrich]

Sorry...forgot to mention engine...running 1600 K series.

Rich