RedRatBike - The current plan is see how I get on.
As I've spend a lot of time making sure the edges are smooth to the touch.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
It ain't half hot mum.
Made a few adjustments to the remaining side panel where it met the rear corner panel, as it seems too long.
As it turned out, by the time I'd got to fixing this edge in place it ended up being
slighty too short.
One day I will trim the bolts holding the driver's side mirror in place.
But for now, I just needed to make a template for the cover panel.
As before, this allowed me to mark up and drill the final holes needed on the side panel.
End of Part 1…
Threaded Mode
