Are you madabout kit cars      
 "We've Got Kit Cars Covered" Information about Madabout-Kitcars.com Contact Madabout-Kitcars.com         Home of UK kit cars - madabout-kitcars.com Various kit car write ups All the latest kit car news Kit car related and general discussion

Search
Manufacturers
Kit Cars
Kit Car Data sheets
Picture Gallery
SVA Knowledgebase
Clubs & Communities
Build cost estimator
Kit cars for sale
Knowledge Base 
KitcarUSA.com
Classic-Kitcars.com
 

Go Back   Madabout Kitcars Forum > Mad Build Area > Sammio Builds and discussions

Sammio Builds and discussions Sammio bodied car builds and specials

Reply
 
Thread Tools Display Modes
  #1  
Old 7th April 2014, 09:46
blooka blooka is offline
Junior Member
 
Join Date: Oct 2013
Posts: 27
blooka is on a distinguished road
Smile Which radiator?

Hi All
Is it possible to fit the original radiator to my Sammio from my herald 13/60 into the same position so that I dont have to add an expansion tank, and without it fouling the bonnet?
If not whats do you think is the best option
Cheers Dave
Reply With Quote
Available from eBay
  #2  
Old 7th April 2014, 10:15
AndyP57's Avatar
AndyP57 AndyP57 is offline
Senior Member
 
Join Date: Dec 2011
Posts: 656
AndyP57 is on a distinguished road
Default

Hi Dave,
In practice, we've always had to lower the radiator, even when using the Navigator bonnet. On our latest car we made a simple steel bracket to hold it in place bolting into existing holes in the chassis. I'll take some photos as soon as I get a chance if it will help.
Reply With Quote
  #3  
Old 7th April 2014, 11:28
blooka blooka is offline
Junior Member
 
Join Date: Oct 2013
Posts: 27
blooka is on a distinguished road
Default

cheers Andy that would be much appreciated
Reply With Quote
  #4  
Old 7th April 2014, 12:12
AndyP57's Avatar
AndyP57 AndyP57 is offline
Senior Member
 
Join Date: Dec 2011
Posts: 656
AndyP57 is on a distinguished road
Default

Hi Dave,

A couple of early photos of 274 radiator fit.





Now tidied up a bit but essentially the same. There's a steel 'joggled' bracket holding on to the bottom using existing holes and I cobbled up a steel rod restraint for the top using parts of the donor's bonnet hinge mechanism. It has a bolt into the top fixing of the radiator and a double nut above and below the existing bracket slot at the chassis end.

Not that the radiator does slope (oops!) forward and has an electric fan with a thermostat in the top hose.

I hope that helps.
Reply With Quote
  #5  
Old 7th April 2014, 13:45
blooka blooka is offline
Junior Member
 
Join Date: Oct 2013
Posts: 27
blooka is on a distinguished road
Default

thanks for that andy, thats probably the way i`ll go.
does it have a header tank on it or will it be fine without one ?
many thanx again Dave
Reply With Quote
  #6  
Old 7th April 2014, 14:02
AndyP57's Avatar
AndyP57 AndyP57 is offline
Senior Member
 
Join Date: Dec 2011
Posts: 656
AndyP57 is on a distinguished road
Default

On this car we mounted a renault Clio header and are currently looking for a good alternative. If we get enough demand we may be able to commission a small tank with correct connections for the existing heater hoses and a pressure cap.
Another alternative is to go the way Mr Towed has, in having an in line filler on an extended top hose running towards the bulkhead 'shelf'.
Reply With Quote
  #7  
Old 7th April 2014, 15:38
Mister Towed's Avatar
Mister Towed Mister Towed is offline
Senior Member
 
Join Date: Jul 2011
Posts: 5,328
Mister Towed is on a distinguished road
Default

Quote:
Originally Posted by AndyP57 View Post
On this car we mounted a renault Clio header and are currently looking for a good alternative. If we get enough demand we may be able to commission a small tank with correct connections for the existing heater hoses and a pressure cap.
Another alternative is to go the way Mr Towed has, in having an in line filler on an extended top hose running towards the bulkhead 'shelf'.
Not sure if you can clearly see how I set mine up in this picture -



As Andy says, I've just got a filler neck in line in the top hose from the 'stat housing, which then returns through 180 degrees almost immediately to run back to the radiator top connection.

If I did another I'd probably use the very elegant solution adopted by Phil J on his builds -



Not the best angle to see what he's done, but the header tank is the small alloy pot immediately behind and just on the far side of the rocker cover. Nice.
Reply With Quote
  #8  
Old 7th April 2014, 16:43
Mister Towed's Avatar
Mister Towed Mister Towed is offline
Senior Member
 
Join Date: Jul 2011
Posts: 5,328
Mister Towed is on a distinguished road
Default

Here we go, found a better pictures of mine, but I have to say I actually prefer Phil J's set up -

Reply With Quote
  #9  
Old 8th April 2014, 19:42
swifty's Avatar
swifty swifty is offline
Senior Member
 
Join Date: Dec 2013
Posts: 839
swifty is on a distinguished road
Default

Apologies for hijacking your post Blooka......Mister Towed the first picture has an alloy rad while the second has what looks to be a standard rad was there a problem fitting the alloy rad?
Reply With Quote
  #10  
Old 8th April 2014, 20:48
Paul L's Avatar
Paul L Paul L is offline
Senior Member
 
Join Date: Feb 2012
Location: Wembley, London
Posts: 5,056
Paul L is on a distinguished road
Default

Swifty - I can answer that one for you...

Post #7
- First photo is of Mr T's alloy radiator
- Second photo is of a different car (Phil's) with a different radiator & an nice expansion tank.

I think the only problem Mr T had with the alloy radiator was when he accidently knocked a hole in it and had to buy another one.

Cheers, Paul.
Reply With Quote
  #11  
Old 8th April 2014, 21:20
davecymru's Avatar
davecymru davecymru is offline
Senior Member
 
Join Date: May 2011
Location: Somerset
Posts: 1,671
davecymru is on a distinguished road
Default

I think the 13/60 rad is a bit smaller than the Vitesse ones, but one thing to be wary of that i had with mine is that originally i lowered it too much and seeing as it's quite exposed under the front it was "squeaky bum time" a few times until i tinkered with it
Reply With Quote
  #12  
Old 10th April 2014, 20:34
Patton's Avatar
Patton Patton is offline
Senior Member
 
Join Date: Jan 2011
Location: Cullompton, Devon
Posts: 328
Patton is on a distinguished road
Default

It could prove easier to say than find one, the MG Midget 1500 has a filler point on top of the thermostate housing and a standard exspansion tank by the radiator cap. PAT
Reply With Quote
  #13  
Old 10th April 2014, 21:18
blooka blooka is offline
Junior Member
 
Join Date: Oct 2013
Posts: 27
blooka is on a distinguished road
Default

thanks for all the info guys I`m slowly getting there with your input
Reply With Quote
  #14  
Old 11th April 2014, 19:48
phil9 phil9 is offline
Senior Member
 
Join Date: Mar 2012
Posts: 745
phil9 is on a distinguished road
Default

i use a rs 2000 ford rad works great


Reply With Quote
  #15  
Old 12th April 2014, 11:40
Mister Towed's Avatar
Mister Towed Mister Towed is offline
Senior Member
 
Join Date: Jul 2011
Posts: 5,328
Mister Towed is on a distinguished road
Default

I'd probably go old-skool with a copper cored radiator if I built another rather than modern alloy. Can't remember which thread it was on but I believe someone far more qualified than I raised a very good point about the thermal conduction qualities of copper being far superior to aluminium in transferring heat from water to air.

My shiny alloy Honda Civic Type R racing rad might look cool (pun fully intended) but it definitely isn't as efficient as Phil's Ford RS 2000 jobby time-warped in from the 70's.
Reply With Quote
  #16  
Old 12th April 2014, 12:26
phil9 phil9 is offline
Senior Member
 
Join Date: Mar 2012
Posts: 745
phil9 is on a distinguished road
Default

the ford rs 2000 rad is copper ,had it made at boston rads it has 64 copper tubes [std 48]looks a bit ruff as paint has come off.. it works very well and just fits nice under bonnet they can make them
as wide as you like the chap said they used them to cool v8s when a small rad is needed...the pipes to the pot also holds a bit more water as well ..works for me ...

Last edited by phil9; 12th April 2014 at 12:30.. Reason: n
Reply With Quote
  #17  
Old 13th April 2014, 10:11
Viatron Viatron is offline
Senior Member
 
Join Date: Apr 2012
Posts: 1,163
Viatron is on a distinguished road
Default

Have been thinking about the rad whilst dealing with the nightmare that is my engine ECU. I too have the Type R Ali Rad but I'm just not sure it will look right so have pretty much decided to give it a dusting of satin black just to make it look a bit more retro.
TTFN
Mac
Reply With Quote
  #18  
Old 17th April 2014, 08:13
Mister Towed's Avatar
Mister Towed Mister Towed is offline
Senior Member
 
Join Date: Jul 2011
Posts: 5,328
Mister Towed is on a distinguished road
Default

Quote:
Originally Posted by phil9 View Post
the ford rs 2000 rad is copper ,had it made at boston rads it has 64 copper tubes [std 48]looks a bit ruff as paint has come off.. it works very well and just fits nice under bonnet they can make them
as wide as you like the chap said they used them to cool v8s when a small rad is needed...the pipes to the pot also holds a bit more water as well ..works for me ...
Were your radiators from this seller and do you get a better price dealing direct Phil?

http://www.ebay.co.uk/itm/RADIATOR-T...item3ccfce1a44
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +0. The time now is 15:35.

copyright © madabout-kitcars.com 2000-2024
terms and conditions | privacy policy