Are you madabout kit cars      
 "We've Got Kit Cars Covered" Information about Madabout-Kitcars.com Contact Madabout-Kitcars.com         Home of UK kit cars - madabout-kitcars.com Various kit car write ups All the latest kit car news Kit car related and general discussion

Search
Manufacturers
Kit Cars
Kit Car Data sheets
Picture Gallery
SVA Knowledgebase
Clubs & Communities
Build cost estimator
Kit cars for sale
Knowledge Base 
KitcarUSA.com
Classic-Kitcars.com
 

Go Back   Madabout Kitcars Forum > Mad Build Area > Sammio Builds and discussions

Sammio Builds and discussions Sammio bodied car builds and specials

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 3rd October 2018, 15:58
freeman41 freeman41 is offline
Junior Member
 
Join Date: Jul 2012
Posts: 23
freeman41 is on a distinguished road
Post Car Went Well

Completed the rally over the weekend of 21st - 23rd September and covered just short of 500 miles. Car performed very well, lots of 3rd gear work through the back roads of the Yorkshire Dales and the North York Moors in the company of friends in a TVR Chimera, so pushed the car fairly hard at times.

Problem? No breakdowns, exhaust leak at the rear section and leak from pinion nose seal which allowed oil to drip onto exhaust, we had fumes coming into the cabin which is rather strange on an open top car.
The alternator pulley worked loose allowing the fan behind the pulley to chatter. This also allowed the key to move so no amount of tightening up cured this or prevented further damage.
The car under steered at times but with a 6 cylinder lump of cast iron up front and a light back end, no wonder.
The breaks worked well but old school motoring, think ahead, meant when I came through the bend the TVR was well ahead.
The car bottomed out quite a lot, so the coilovers need more adjustment. Also a rethink on the tyres is needed. On wet roads, especially roundabouts the back end would let go and the wheels would spin when setting off. The car was fully loaded with 2 people on board so not much chance of getting more weight over the back wheels. I reduced the tyre pressure to 25psi, this did improve things a bit.

I was very happy with the shakedown run and wished this was the start of summer and not the end.

Had to buy new alternator, shaft was worn with the pulley and fan rattling, pinion seal on order from Moss. A busy few days ahead.

Cheers Trevor
Attached Images
File Type: jpg 20180922_144024.jpg (96.4 KB, 48 views)
Reply With Quote
Available from eBay
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +0. The time now is 13:18.

copyright madabout-kitcars.com 2000-2020
terms and conditions | privacy policy