|
Miglia Builds and discussion Miglia bodied builds |
24th June 2024, 00:53
|
|
Senior Member
|
|
Join Date: Aug 2013
Location: Brisbane, Australia
Posts: 296
|
|
testing google image link 2
end test
|
27th June 2024, 15:52
|
|
Senior Member
|
|
Join Date: Feb 2012
Location: Wembley, London
Posts: 5,071
|
|
Tim - I found the link by using 'Quote' on your last post and could see the photo.
Right clicking on the photo allowed me to copy the link and that gives me this.
So it definitely works.
|
1st July 2024, 12:36
|
|
Senior Member
|
|
Join Date: Aug 2013
Location: Brisbane, Australia
Posts: 296
|
|
ok with the picture there you might be able to see i was using expanding foam. i had made a paper cylinder, cut to match the compound curve of the body under the headlight.
when trimmed it looked like this:
https://photos.app.goo.gl/voNC9884CJvnGd4s9
Last edited by 1iTim; 8th July 2024 at 01:19..
Reason: photo again
|
1st July 2024, 12:51
|
|
Senior Member
|
|
Join Date: Aug 2013
Location: Brisbane, Australia
Posts: 296
|
|
the rear was done similarly, after much mocking up and family discussion about placement.
https://photos.app.goo.gl/gAzmTDsNiGSBHgd4A
https://photos.app.goo.gl/nSLD1XtfhuH2VcKr8
actually from this photo I had abandonned the foam idea as too fiddly when all i needed to do was glue the disk onto the back of the body in the right spot:
[img][/img]
I used CAD to get a mirror template/jig for the left. at this time I also prepared the herald number plate light. i'm afraid i have that at a barely noticible jaunty angle. what looks like a crack behind the speed hump is just a casting defect in the gel coat.
https://photos.app.goo.gl/Uk2yo6ZdHa7nVrUS6
this is what it all looks like at the back finished. i did go ahead and hit the back with primer and red out of a rattle can but dont have a pic of that in google ready. you can just see the speedo. I cut the dash to low and have extended it since then.
https://photos.app.goo.gl/5a7N8dNzBs26HymL8
thanks for watching!
T
Last edited by 1iTim; 8th July 2024 at 01:30..
Reason: photos
|
1st July 2024, 12:58
|
|
Senior Member
|
|
Join Date: Aug 2013
Location: Brisbane, Australia
Posts: 296
|
|
found a pic of the back - well its mostly a pick of my little helper, but you see the car, the lights, and the reflectors I had to put on - you know, laws and boring stuff.
[img]https://photos.app.goo.gl/TjqVmRFSeN2pXQ4D8[\img]
https://photos.app.goo.gl/TjqVmRFSeN2pXQ4D8
Last edited by 1iTim; 8th July 2024 at 01:32..
Reason: picture
|
7th July 2024, 14:11
|
|
Senior Member
|
|
Join Date: Feb 2012
Location: Wembley, London
Posts: 5,071
|
|
Tim - Sorry, I can't seem to get those links to work.
There is something not quite right here, as the code I got for the photo that did work, is a LOT smaller than the code for the latest photos you posted.
Cheers, Paul.
|
8th July 2024, 00:57
|
|
Senior Member
|
|
Join Date: Aug 2013
Location: Brisbane, Australia
Posts: 296
|
|
Quote:
Originally Posted by Paul L
Tim - Sorry, I can't seem to get those links to work.
There is something not quite right here, as the code I got for the photo that did work, is a LOT smaller than the code for the latest photos you posted.
Cheers, Paul.
|
hey paul - frustrating. I tested those links and it showed succesfuly on those tests, and i''m sure they showed OK on the day i did it. I have those set to public and all that.
I will try again, but I am obviously doing this wrong as so many various ways are not working for me since photobucket.
thanks,
Tim
|
8th July 2024, 01:33
|
|
Senior Member
|
|
Join Date: Aug 2013
Location: Brisbane, Australia
Posts: 296
|
|
ok i have just put the links in - the img /img thing does not work for me. still will take any advice.
T
|
8th July 2024, 07:56
|
|
Senior Member
|
|
Join Date: Feb 2012
Location: Wembley, London
Posts: 5,071
|
|
Tim – We are definitely getting closer to cracking this.
As I think you are copying the link of a photo in album view, rather than the individual photo.
I started with this link.
https://photos.app.goo.gl/TjqVmRFSeN2pXQ4D8
Which looked like this on my screen, after I cropped it to highlight the initial code.
I then used ‘Open image in new tab’, rather than use the ‘Copy link’ option in that menu.
In the new tab that opened, I then used the ‘Copy Image Link’ to get the code for the IMG tags.
Which gives me this.
It seems the code needs to start with ‘lh3 .google user content . com’ (with no spaces).
Rather than ‘photos . google . com’.
Following the same process, I also got these.
I think the sequence should be:
Select the photo album first
Select the photo in that album next
Then right click the photo for the ‘Copy Image Link’ code
Good luck, Paul.
PS
Nice work on the light plinths.
|
8th July 2024, 08:25
|
|
Senior Member
|
|
Join Date: Aug 2013
Location: Brisbane, Australia
Posts: 296
|
|
|
8th July 2024, 08:27
|
|
Senior Member
|
|
Join Date: Aug 2013
Location: Brisbane, Australia
Posts: 296
|
|
the 'driving lights' or parkers or whatever these white ones are called, just placed in cut outs of the grill plastic.
Last edited by 1iTim; 8th July 2024 at 08:31..
Reason: photo
|
8th July 2024, 08:34
|
|
Senior Member
|
|
Join Date: Aug 2013
Location: Brisbane, Australia
Posts: 296
|
|
[QUOTE=Paul L;108931]
I think the sequence should be:
Select the photo album first
Select the photo in that album next
Then right click the photo for the
I get copy address not link. The short link is what i get when i use google's link generator. the long bit that starts with google user content seems to work today but from past experience will be gone tomorrow.
T
Last edited by 1iTim; 8th July 2024 at 08:36..
|
9th July 2024, 07:49
|
|
Senior Member
|
|
Join Date: Feb 2012
Location: Wembley, London
Posts: 5,071
|
|
Quote: "I get copy address not link"
Tim - I guess that is the problem, but I'm sorry I have no idea why you are not getting the 'Copy image link' that I get when I look at your photos.
I get a 'No Entry' sign when I looked at photo codes in your latest posts.
Whereas, at least these links bring up the photo.
https://photos.app.goo.gl/eeQP7KSMTvE6yyvz5
Anyway, keep chipping away at your build, good luck, Paul.
|
Currently Active Users Viewing This Thread: 2 (0 members and 2 guests)
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT +0. The time now is 20:27.
|