Are you madabout kit cars      
 "We've Got Kit Cars Covered" Information about Madabout-Kitcars.com Contact Madabout-Kitcars.com         Home of UK kit cars - madabout-kitcars.com Various kit car write ups All the latest kit car news Kit car related and general discussion

Search
Manufacturers
Kit Cars
Kit Car Data sheets
Picture Gallery
SVA Knowledgebase
Clubs & Communities
Build cost estimator
Kit cars for sale
Knowledge Base 
KitcarUSA.com
Classic-Kitcars.com
 

Go Back   Madabout Kitcars Forum > Mad Build Area > Bodywork

Bodywork Share your thoughts, problems and ideas about bodywork related issues

Reply
 
Thread Tools Display Modes
  #1  
Old 9th March 2016, 01:03
Car photographer Car photographer is offline
Senior Member
 
Join Date: Apr 2014
Location: Birmingham, UK
Posts: 545
Car photographer is on a distinguished road
Default Painting fiberglass??

Hi everyone
I've been trying to find out the best options for painting my kit (fiberglass)
But I seem to get conflicting answers - some say use etch primer, some say don't, some say 2k some cellulose - does anybody have any proper experience or knowledge of the best options to get a good finish and avoid cracking in the future.

Also not sure whether to try doing it myself or finding a local expert to take it on - any ideas or reccommend painters in the Birmingham area?
Cheers
Paul

Last edited by Car photographer; 9th March 2016 at 01:06..
Reply With Quote
Available from eBay
  #2  
Old 9th March 2016, 19:07
tricky360 tricky360 is offline
Senior Member
 
Join Date: May 2010
Posts: 101
tricky360 is on a distinguished road
Default

Dna are in Birmingham , they should know who to talk to to get a glassfibre car painted
Reply With Quote
  #3  
Old 9th March 2016, 23:12
Roadster's Avatar
Roadster Roadster is offline
Senior Member
 
Join Date: Jun 2011
Posts: 935
Roadster is on a distinguished road
Default

Im guessing you would like a classic looking colour and finish

If you are planning to do yourself you could use coach enamel it self levels and is nice to work with.

http://www.craftmasterpaints.co.uk/
I painted my Roadster Connaught green the D type racing green.

I just sanded the body to remove the shiny finish, I used craftmaster primer and then enamel with the largest brush I could.

Reply With Quote
  #4  
Old 10th March 2016, 01:14
Car photographer Car photographer is offline
Senior Member
 
Join Date: Apr 2014
Location: Birmingham, UK
Posts: 545
Car photographer is on a distinguished road
Default

Quote:
Originally Posted by Roadster View Post
Im guessing you would like a classic looking colour and finish

If you are planning to do yourself you could use coach enamel it self levels and is nice to work with.

http://www.craftmasterpaints.co.uk/
I painted my Roadster Connaught green the D type racing green.

I just sanded the body to remove the shiny finish, I used craftmaster primer and then enamel with the largest brush I could.

Sounds interesting how does it come with flexing of the fiberglass over time - does it withstand cracking better than normal paint?
Reply With Quote
  #5  
Old 10th March 2016, 10:45
Roadster's Avatar
Roadster Roadster is offline
Senior Member
 
Join Date: Jun 2011
Posts: 935
Roadster is on a distinguished road
Default

The lay up and the curves on the shell meant there was minimal flexing.
However they use the paint on traction engines and locomotives so I would say it should hold up ok.
For the 2 years it was with me I had no issues.
Reply With Quote
  #6  
Old 10th March 2016, 21:27
Car photographer Car photographer is offline
Senior Member
 
Join Date: Apr 2014
Location: Birmingham, UK
Posts: 545
Car photographer is on a distinguished road
Default

Cool, thanks
Reply With Quote
  #7  
Old 10th March 2016, 21:34
molleur molleur is offline
Senior Member
 
Join Date: Jun 2015
Posts: 1,401
molleur is on a distinguished road
Default

Good link on fiberglass prep and paint

http://www.hotrod.com/how-to/additio...s-preparation/
Reply With Quote
  #8  
Old 11th March 2016, 20:11
Car photographer Car photographer is offline
Senior Member
 
Join Date: Apr 2014
Location: Birmingham, UK
Posts: 545
Car photographer is on a distinguished road
Default

Cheers
Reply With Quote
  #9  
Old 12th March 2016, 06:15
Paul L's Avatar
Paul L Paul L is offline
Senior Member
 
Join Date: Feb 2012
Location: Wembley, London
Posts: 5,056
Paul L is on a distinguished road
Default

Car Photographer - Here is a link on hand painting a car (which I intend to follow):

http://www.rodsnsods.co.uk/forum/tec...ting-car-98714

Mister Towed & Swifty are just two of the Sammio builders who covered their painting experience in detail.

Mr T often says his lack of painting experience left him with something that looked like "old" paint.

The thing to remember is that old racing cars didn't alway have perfect paint originally.

Good luck, Paul.
Reply With Quote
  #10  
Old 12th March 2016, 09:33
Car photographer Car photographer is offline
Senior Member
 
Join Date: Apr 2014
Location: Birmingham, UK
Posts: 545
Car photographer is on a distinguished road
Default

Cheers, yeah I've considered that it might look more authentic that way - not sure which way to go yet
Reply With Quote
  #11  
Old 12th March 2016, 09:51
Roadster's Avatar
Roadster Roadster is offline
Senior Member
 
Join Date: Jun 2011
Posts: 935
Roadster is on a distinguished road
Default

Quote:
Originally Posted by Car photographer View Post
Cheers, yeah I've considered that it might look more authentic that way - not sure which way to go yet
What colours are you considering?
Reply With Quote
  #12  
Old 12th March 2016, 10:30
EL PRIMER's Avatar
EL PRIMER EL PRIMER is offline
Senior Member
 
Join Date: Nov 2013
Posts: 143
EL PRIMER is on a distinguished road
Default

I would listen to Jeff H 's advice on the Tribute forum . You are getting first hand info from a guy who's been painting classic and modern cars for about 30 years .
''A mate of mine said...'' advice or advice from someone who doesnt paint for a living can sometimes lose a bit in translation
Reply With Quote
  #13  
Old 12th March 2016, 16:20
NeilF355 NeilF355 is offline
Senior Member
 
Join Date: Sep 2011
Location: Teesdale
Posts: 238
NeilF355 is on a distinguished road
Default

Quote:
Originally Posted by Car photographer View Post
I've been trying to find out the best options for painting my kit (fiberglass)
But I seem to get conflicting answers - some say use etch primer, some say don't, some say 2k some cellulose - does anybody have any proper experience or knowledge of the best options to get a good finish and avoid cracking in the future.

Hi Paul
To put in my two penn’orth I think one of the reasons you get conflicting answers on etch primer is that no one has really done a proper comparison so it’s all a bit subjective. Personally I don’t bother with an acid etch primer, I use a 2K high build primer followed by a guide coat and a lot of blocking off before I put on the colour.

As far as colour coat goes I used a 1K with a lacquer on my first spray job but for the next three I have used a 2K and compounded it to get the finish I wanted. I also find that 2K is a lot harder finish and seems to resist chipping a lot better than 1K.

I’ve never sprayed a whole car with cellulose so I can’t comment on it. I once used a waterbourne paint on some alloy wheels and found it very difficult to use so I would never ever use it again.

I did find that putting too much paint (I ended up with 15 coats on a bonnet once) results in cracking of the paint, but in my experience most cracking is due to the underlying gel coat or grp so different paints don’t have much effect.

Finally as regards a DIY or Professional job, I think that the key to a good finish is the preparation. If you are going to prepare the car yourself then you will probably need to have all the gear (compressor, spraygun, mask/air fed visor) to spray primer anyway so you could spray the colour coats yourself. I found it the most satisfying part of the job, apart from looking at the finished car!
Neil

https://www.dropbox.com/s/d1y757hp8a...193_n.jpg?dl=0

Last edited by NeilF355; 12th March 2016 at 16:36..
Reply With Quote
  #14  
Old 12th March 2016, 16:54
DaveP DaveP is offline
Senior Member
Enthusiast
 
Join Date: Jun 2015
Location: Reading, Berkshire
Posts: 688
DaveP is on a distinguished road
Default

Great response Neil. More importantly - wicked car !

Dave
Reply With Quote
  #15  
Old 12th March 2016, 18:12
rossnzwpi rossnzwpi is offline
Senior Member
Enthusiast
 
Join Date: Mar 2008
Posts: 225
rossnzwpi is on a distinguished road
Default awesome paint job

Fantastic work Neil. Is that a GTO based on a Porsche 944?
To the paint question I'd just add that getting a good gun and compressor is important too. I've found that a lot of the cheap ones don't give great results. Then practice practice practice. Isn't that what the donor's panels are for?
Reply With Quote
  #16  
Old 13th March 2016, 00:52
Car photographer Car photographer is offline
Senior Member
 
Join Date: Apr 2014
Location: Birmingham, UK
Posts: 545
Car photographer is on a distinguished road
Default

Thanks everyone
Reply With Quote
  #17  
Old 13th March 2016, 10:28
NeilF355 NeilF355 is offline
Senior Member
 
Join Date: Sep 2011
Location: Teesdale
Posts: 238
NeilF355 is on a distinguished road
Default

Quote:
Originally Posted by rossnzwpi View Post
Is that a GTO based on a Porsche 944?
Well spotted, it's the 944 S2 which has the 3 litre engine to get the correct engine capacity...I'm just short 8 cylinders
Reply With Quote
  #18  
Old 14th March 2016, 15:42
phil.coyle phil.coyle is offline
Member
 
Join Date: Nov 2011
Posts: 47
phil.coyle is on a distinguished road
Default

Going back to the days of mini marcos and the Marcos 1600 etc. we always used a polyurethane paint on gelcoats, mainly because it etches itself into the gelcoat and being polyurethane it's flexible. It was also used on 19ft fibreglass yachts without any problems, try SML marine paints or Jotun for more help or confusion?
Reply With Quote
  #19  
Old 14th March 2016, 17:36
Car photographer Car photographer is offline
Senior Member
 
Join Date: Apr 2014
Location: Birmingham, UK
Posts: 545
Car photographer is on a distinguished road
Default

thanks
Reply With Quote
  #20  
Old 24th March 2016, 08:24
smash smash is offline
Senior Member
 
Join Date: Feb 2015
Posts: 678
smash is on a distinguished road
Default

Quote:
Originally Posted by Roadster View Post
Im guessing you would like a classic looking colour and finish

If you are planning to do yourself you could use coach enamel it self levels and is nice to work with.

http://www.craftmasterpaints.co.uk/
I painted my Roadster Connaught green the D type racing green.

I just sanded the body to remove the shiny finish, I used craftmaster primer and then enamel with the largest brush I could.

Wow I didn't realise you could get a flat finish with a brush - and they use it on steam engines? So that'll be Traction Racing Green then!

Last edited by smash; 24th March 2016 at 08:38..
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +0. The time now is 11:06.

copyright © madabout-kitcars.com 2000-2024
terms and conditions | privacy policy