Are you madabout kit cars      
 "We've Got Kit Cars Covered" Information about Madabout-Kitcars.com Contact Madabout-Kitcars.com         Home of UK kit cars - madabout-kitcars.com Various kit car write ups All the latest kit car news Kit car related and general discussion

Search
Manufacturers
Kit Cars
Kit Car Data sheets
Picture Gallery
SVA Knowledgebase
Clubs & Communities
Build cost estimator
Kit cars for sale
Knowledge Base 
KitcarUSA.com
Classic-Kitcars.com
 

Go Back   Madabout Kitcars Forum > Mad Build Area > Marlin Sportster, Cabrio, Berlinetta and Roadster builds

Marlin Sportster, Cabrio, Berlinetta and Roadster builds Enthused or Confused about your vintage Marlin build? Ask away here or show off your build.

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #26  
Old 21st August 2016, 12:55
Nigbo Nigbo is offline
Junior Member
 
Join Date: Jul 2013
Posts: 12
Nigbo is on a distinguished road
Default Binding brakes - hard pedal- my theory

So having fitted my servo and having servere problem with pedal getting rock hard and brakes binding on. All was well for the first 250 miles so the basic set up must have been correct. I did all the recommended things ( return spring on the pedal and rose joint between the pedal and servo input rod).

Everybody here with this problem is thinking it related to alignment but i'm beginning to suspect its not. Having watched at some length a detailed video on how these servo's actually work it seems to me that the problem is related to the atmospheric valve failing to reseat properly when the pedal is released or pressure on it reduced. Its admits too much air in.

Why is the happening maybe related to one thing all BMW engined Sportster's have ( i don't know about other non E series engines ) but the exhaust manifold sits in very close proximity to the exhaust servo.

So these servo's get a big dose of exhaust heat. In addition the heat is not even. My servo gets very hot underneath as its exposed heat rising ( esp in traffic ) from the exhaust manifold collector pipes ( i have 2 on my M3 Evo engine) . Also my bonnet has no venting on it which may make it worse.

So my theory is that given these servo's are fabricated out of pressed steel, uneven heating can lead to it getting distorted and either the atmospheric valve does not seat tightly or the whole chamber is leaking.

Would appreciate anybodies comments /thoughts on my ideas.

I'm in communication with Pirate Jack ( where i brought them from) and waiting to see what they say.
Reply With Quote
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +0. The time now is 01:30.

copyright © madabout-kitcars.com 2000-2020
terms and conditions | privacy policy