Are you madabout kit cars      
 "We've Got Kit Cars Covered" Information about Madabout-Kitcars.com Contact Madabout-Kitcars.com         Home of UK kit cars - madabout-kitcars.com Various kit car write ups All the latest kit car news Kit car related and general discussion

Search
Manufacturers
Kit Cars
Kit Car Data sheets
Picture Gallery
SVA Knowledgebase
Clubs & Communities
Build cost estimator
Kit cars for sale
Knowledge Base 
KitcarUSA.com
Classic-Kitcars.com
 

Go Back   Madabout Kitcars Forum > Mad Build Area > Marlin 5exi builds

Marlin 5exi builds Calling all you sexi builders....sorry 5exi builders, show us your progress.

Reply
 
Thread Tools Display Modes
  #1  
Old 1st December 2005, 08:16
tomboysexi tomboysexi is offline
Senior Member
Enthusiast
 
Join Date: Mar 2004
Location: Romford Essex
Posts: 124
tomboysexi is on a distinguished road
Default SVA Failure

Hi Everyone,

To no one's surprise my turbo fell foul to the inspectors in Chelmsford yesterday. I should have realised how 'petty' the regs can be after reading fellow builders failures, but when the examiner failed the car on a bulb that actually blew while he was playing with the controls I started to laugh.

So in general my failure was down to:-

1. The seat belt anchorage bar was found to be unacceptable.

2. Numerous 'sharp' edges to bodywork These are not where the body has been cut.

3. Headlights require adjustment.

4. Rear wheels exceed arches.

5. Poor braking performance.

At a guess a couple of weeks work at most, but guys I must say the drive up the A12 at 7:00, what a pleasure, leaving home in the dark and heavy frost. every driver looking at you, every passenger waving or thumbs up.

Then on the way back I took the scenic route across to Ongar and then down through Stapleford Abbotts, by now it was lunchtime and there were a few people around, I have never seen so many admiring looks.

Best one of all was a farm tractor coming the other way with at least 30 cars behind (we have all been there), as I passed each car the driver stared and had to check out the back in their mirrors.

So am I down? no! Just have been given even more incentive.

Regards to all builders

Trev
Reply With Quote
Available from eBay
  #2  
Old 1st December 2005, 08:56
Bennyh Bennyh is offline
Junior Member
 
Join Date: Feb 2005
Location: Near Aylesbury
Posts: 17
Bennyh is on a distinguished road
Default

Sorry to hear about your SVA failure Trev. You said that one thing was the seat belt anchorage bar. Is this the bar that goes between the two side posts of the roll cage when using harnesses? If so have you used the marlin spec item and what are you going to do to resolve this, I was going to use harnesses on my car.
Good Luck
Benny H
Reply With Quote
  #3  
Old 1st December 2005, 09:05
Ex-Biker Ex-Biker is offline
Senior Member
Enthusiast
 
Join Date: Sep 2003
Location: Cornwall
Posts: 684
Ex-Biker is on a distinguished road
Default

Tuff one Trev.

Good luck getting it all done.

Where are the sharp edges?

& Benny beat me to the other issue. I have the Marlin Harness & bar. Glad I kept the original seat belts. Would prefer not to have to fit them though!
Reply With Quote
  #4  
Old 1st December 2005, 10:03
marlinturbo marlinturbo is offline
Senior Member
Enthusiast
 
Join Date: Aug 2004
Location: Taunton, Somerset
Posts: 235
marlinturbo is on a distinguished road
Default

Trev,

I'll post each of your failures for discussion as separate topics, as I went thru this lot too. This might help others.

John
MarlinTurbo
Reply With Quote
  #5  
Old 1st December 2005, 10:23
limpabit's Avatar
limpabit limpabit is offline
Senior Member
Enthusiast
 
Join Date: Oct 2004
Location: Basildon, Essex
Posts: 1,800
limpabit is on a distinguished road
Default

Unlucky Trev. At least you have a list of what's wrong.

This brake problem seems to be common failures.

Let me know if you need any help. Also if you coulld, post some pictures of examples where these shape edges are.

Cheers

John
Reply With Quote
  #6  
Old 1st December 2005, 22:02
holgate86 holgate86 is offline
Senior Member
Enthusiast
 
Join Date: Apr 2004
Location: Stockton on Tees
Posts: 191
holgate86 is on a distinguished road
Default sva

Hi Trev,
I think it's pretty hard to pass first time if you haven't had experience with the sva test. I know when mine failed on similar things to yours I didn't even consider some of the items as potential problems, even the fog and reverse lamp failed because it had a sharp edge where the lens didn't quite cover the housing.
If I had to go through the same process again with the experience gained I would stand a better chance but there ain't no guarantees.
I had to fit standard inertia belts for my sva test because my harness belts weren't delivered in time and they passed ok. I asked the sva inspector if he would pass the harness bar and he said probably not. I have since fitted the harness bar and belts and it seems pretty strong to me but only a crash would test it properly. I suppose a centre mount for the bar would improve it's strength substantially.

good luck with retest. Brian
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +0. The time now is 08:52.

copyright madabout-kitcars.com 2000-2019
terms and conditions | privacy policy