Are you madabout kit cars      
 "We've Got Kit Cars Covered" Information about Madabout-Kitcars.com Contact Madabout-Kitcars.com         Home of UK kit cars - madabout-kitcars.com Various kit car write ups All the latest kit car news Kit car related and general discussion

Search
Manufacturers
Kit Cars
Kit Car Data sheets
Picture Gallery
SVA Knowledgebase
Clubs & Communities
Build cost estimator
Kit cars for sale
Knowledge Base 
KitcarUSA.com
Classic-Kitcars.com
 

Go Back   Madabout Kitcars Forum > Mad Build Area > Phantom GTR/Vortex Builds

Phantom GTR/Vortex Builds In a Vortex with your Phantom build? Share your build experiences here.

Reply
 
Thread Tools Display Modes
  #1  
Old 8th August 2011, 20:35
grahamhughes grahamhughes is offline
Junior Member
 
Join Date: May 2011
Location: preston lancs
Posts: 17
grahamhughes is on a distinguished road
Default vortex kit

Hi all
My name is graham hughes and i have just ordered from chris packs1/2 of the vortex. I have an st220 mondeo as a donor and would like any advise or assistance. I am thinking of fitting the mondeo wiring harness and removing the wires and electrical items i dont need. I am also fitting the new fiesta steering column with the electric power assist so any help connecting this and the stalks to the mondeo wiring would be a great help
Reply With Quote
Available from eBay
  #2  
Old 10th September 2011, 21:38
EddyP EddyP is offline
Senior Member
Enthusiast
 
Join Date: Apr 2006
Posts: 223
EddyP is on a distinguished road
Default

Hi Graham,
Using the Mondeo harness will be a good start, I suggest when you strip it from the car that you label all the connections, then slowly untape the loom and remove all the cables you wont need, for example rear electric windows etc..
It would be worth getting yourself a copy of the Ford TIS cd from ebay, this has all of the ford wiring diagrams in it so that you can understand what does what.

There are different ways to approach the harness design, i've done two now, and have created separate body and engine harnesses, i've also used trailer cable to each corner of the car for the lighting as it made it a fairly neat way to have enough cores to each corner, as these are fitted to the chassis rather than the body.
Have you got much auto electrics experience?
Reply With Quote
  #3  
Old 11th September 2011, 10:49
grahamhughes grahamhughes is offline
Junior Member
 
Join Date: May 2011
Location: preston lancs
Posts: 17
grahamhughes is on a distinguished road
Default

Hi Eddy
I wont have a prob with the wiring as i am an electrician. i have already removed the harness from the car labelling all the wires as i went along. As the battery is in the front of the car in the vortex i was planning on putting both the fuseboxes at the front of the car, the auxilary one(engine bay) under the bonnet and the other one behind the glovebox as in the mondeo. The only wires i would then have to extend/modify are the ones to the engine bay(Lambda sensors,airflow meter,starter motor, and the engine loom etc. I was just wondering if anybody else has used a mondeo loom and whether this was the right and best option
Regards Graham

Last edited by grahamhughes; 11th September 2011 at 14:16..
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +0. The time now is 21:18.

copyright madabout-kitcars.com 2000-2018
terms and conditions | privacy policy