Are you madabout kit cars      
 "We've Got Kit Cars Covered" Information about Madabout-Kitcars.com Contact Madabout-Kitcars.com         Home of UK kit cars - madabout-kitcars.com Various kit car write ups All the latest kit car news Kit car related and general discussion

Search
Manufacturers
Kit Cars
Kit Car Data sheets
Picture Gallery
SVA Knowledgebase
Clubs & Communities
Build cost estimator
Kit cars for sale
Knowledge Base 
KitcarUSA.com
Classic-Kitcars.com
 

Go Back   Madabout Kitcars Forum > Mad Build Area > Tribute Automotive Builds

Tribute Automotive Builds Discuss your Tribute kit build

Reply
 
Thread Tools Display Modes
  #41  
Old 30th June 2018, 00:58
molleur molleur is offline
Senior Member
 
Join Date: Jun 2015
Posts: 1,401
molleur is on a distinguished road
Default

Small update

All electrical done, everything works too. Made a neat job of extending and routing the harness. Found a solution for the fuel fill bit. Stainless Steel flexible radiator aftermarket hose (all stainless, no rubber liner).
Works a treat with the big Monza cap as forward as practicable on the fender.
The latest version of the Tribute front clam must be a lot lighter! I moved the Z3 struts to the bottom forward position and it holds the bonnet up fine. Not too bad for seven days into it.

Next trip will see final body install and major sanding. Perhaps I'll get it in primer as well. I'm confused about both the windscreen trim and the windscreen header rubber where the adapter FRP part inserts to glue the body top to. I understand the plastic windscreen (narrow trim all around) should be removed to fit the "A" pillar parts. How much of the windscreen/soft top rubber must go away. Only across the top of the windscreen, or the entire piece? Traveling back there early Monday.

Real drag trying to use someones PC (ancient and very slow).
Not to worry, photos coming soon!
Reply With Quote
  #42  
Old 1st July 2018, 19:10
Paul L's Avatar
Paul L Paul L is offline
Senior Member
 
Join Date: Feb 2012
Location: Wembley, London
Posts: 5,056
Paul L is on a distinguished road
Default

Sounds like lots of progress.

If no one else has included details about the windscreen rubber in their build threads, could you take some photos and add some words to show how you did it?

As between all the build threads there should be the equivalent of a "How to" manual.

Good luck, Paul.
Reply With Quote
  #43  
Old 1st July 2018, 19:46
molleur molleur is offline
Senior Member
 
Join Date: Jun 2015
Posts: 1,401
molleur is on a distinguished road
Default

Quote:
Originally Posted by Paul L View Post
Sounds like lots of progress.

If no one else has included details about the windscreen rubber in their build threads, could you take some photos and add some words to show how you did it?

As between all the build threads there should be the equivalent of a "How to" manual.

Good luck, Paul.
WILCO, a bit later though.
Reply With Quote
  #44  
Old 9th July 2018, 20:31
molleur molleur is offline
Senior Member
 
Join Date: Jun 2015
Posts: 1,401
molleur is on a distinguished road
Default

Update
Will drive the 250 home tomorrow or Wednesday. Need to make a new small bonnet. Upper skin was sucked in when bonded to the inner skin. I'll finish up at my garage at home. Lots of little surprises, but nothing major at this point. When it's ready for paint it will go back to the other coast of Florida. Window frames are out for chrome powder coating.

Photos soon, I promise..
Reply With Quote
  #45  
Old 10th July 2018, 00:52
molleur molleur is offline
Senior Member
 
Join Date: Jun 2015
Posts: 1,401
molleur is on a distinguished road
Default

Anyone have useful tips for installing the Tribute sliding side windows? I'll have them back from chrome powder coating soon.

Chris sent a pair of trim pieces and rubber channel for them, how used? Appear to go on the vertical pane of inner or outer glass???
Reply With Quote
  #46  
Old 10th July 2018, 08:39
casamolino casamolino is offline
Senior Member
 
Join Date: Dec 2012
Posts: 432
casamolino is on a distinguished road
Default

Good morning Molleur , the following show the side window layout on my car , as far as i am aware there have been no significant changes since my car was built , Geoff .









Reply With Quote
  #47  
Old 10th July 2018, 11:33
molleur molleur is offline
Senior Member
 
Join Date: Jun 2015
Posts: 1,401
molleur is on a distinguished road
Default

Thank you Jeff.
Reply With Quote
  #48  
Old 10th July 2018, 21:48
molleur molleur is offline
Senior Member
 
Join Date: Jun 2015
Posts: 1,401
molleur is on a distinguished road
Default

Apologies, Geoff!

What did you use for the trim around the door frame on the main body?
Reply With Quote
  #49  
Old 11th July 2018, 16:55
casamolino casamolino is offline
Senior Member
 
Join Date: Dec 2012
Posts: 432
casamolino is on a distinguished road
Default

Molleur from memory Jeff who did the excellent spray job on my car supplied and fitted the strip , it is 16mm wide , Geoff .
Reply With Quote
  #50  
Old 11th July 2018, 17:20
molleur molleur is offline
Senior Member
 
Join Date: Jun 2015
Posts: 1,401
molleur is on a distinguished road
Default

Thank you Geoff!
Reply With Quote
  #51  
Old 13th July 2018, 18:16
molleur molleur is offline
Senior Member
 
Join Date: Jun 2015
Posts: 1,401
molleur is on a distinguished road
Default

Pile of parts and a few pics, back home.
Attached Images
File Type: jpg dscn2631.jpg (89.8 KB, 246 views)
File Type: jpg dscn2629.jpg (95.8 KB, 84 views)
File Type: jpg dscn2632.jpg (87.7 KB, 89 views)
File Type: jpg dscn2633.jpg (96.3 KB, 84 views)
Reply With Quote
  #52  
Old 13th July 2018, 18:22
molleur molleur is offline
Senior Member
 
Join Date: Jun 2015
Posts: 1,401
molleur is on a distinguished road
Default

My "friends" assisted me while I was away. Screwed up door handles and door skins bonded on slightly "off". Have to cut into Z3 inner doors to correct (if I can). Or, cut a huge hole in the door skins! Or both!

Perfectly fitted bonnet now required major adjustment, etc.

Hate the MGB GT rear window, will likely get the Grassbank version when I can afford it. My quick build has now turned into a longer range project.
Reply With Quote
  #53  
Old 13th July 2018, 18:50
Jaguartvr's Avatar
Jaguartvr Jaguartvr is offline
Senior Member
 
Join Date: Jan 2014
Location: Egham, Surrey
Posts: 1,780
Jaguartvr is on a distinguished road
Default

Wrong indicators!

Sorry but they just have to be

https://www.ebay.co.uk/itm/Seitenbli...19.m1438.l2649


Expensive but a real finishing touch.
Reply With Quote
  #54  
Old 13th July 2018, 18:56
molleur molleur is offline
Senior Member
 
Join Date: Jun 2015
Posts: 1,401
molleur is on a distinguished road
Default

I know, but had the Fiat 500 ones. More than one original 250 used them.
Reply With Quote
  #55  
Old 14th July 2018, 07:39
Paul L's Avatar
Paul L Paul L is offline
Senior Member
 
Join Date: Feb 2012
Location: Wembley, London
Posts: 5,056
Paul L is on a distinguished road
Default

Good to see some photos.



I know you took a risk with a long distance purchase.

But I hope you think the car is worth the effort.

Good luck, Paul.
Reply With Quote
  #56  
Old 14th July 2018, 12:52
molleur molleur is offline
Senior Member
 
Join Date: Jun 2015
Posts: 1,401
molleur is on a distinguished road
Default

Quote:
Originally Posted by Paul L View Post
Good to see some photos.



I know you took a risk with a long distance purchase.

But I hope you think the car is worth the effort.

Good luck, Paul.
Thanks Paul,
It will be when finished. Longer term project after my friends help.
I'll have to relocate the door handles with the skins bonded on!
Reply With Quote
  #57  
Old 9th August 2018, 22:17
molleur molleur is offline
Senior Member
 
Join Date: Jun 2015
Posts: 1,401
molleur is on a distinguished road
Default

Small update.
FRP door skins cut out, the mini handles relocated and panels are
glassed back in. What a pain! Working in 100 degree F heat too.
Have to make a new small bonnet, Tribute part too warped.

Cut a large section of the rear fender out to access the badly done fuel fill system of radiator hose and aluminum flex hose, all bonded with the adhesive (soft from gasoline fumes). Need to completely rethink this one.

Need to do the bonnet cut to improve the poorly located bonded on door skins by friends (need about 1/4 inch outward both sides).

Eliminating boot handle, and will use vintage spring latches from Europa Spares.

Then on to molding new "A" pillar trims as they were bonded on out of alignment as well. Grind the misfits off!

Should keep me busy for a bit! Camera broken, pics soon.

Noticed the front wheel arch opening is about 1/2 inch different at the lower rearmost edges, side to side. Easily corrected (this will help with my rockers as well).

Last edited by molleur; 9th August 2018 at 22:22.. Reason: addition
Reply With Quote
  #58  
Old 10th August 2018, 08:36
Barber's Avatar
Barber Barber is offline
Senior Member
 
Join Date: Apr 2016
Location: Camberley
Posts: 972
Barber is on a distinguished road
Default

Pics? Please.
Reply With Quote
  #59  
Old 10th August 2018, 17:05
molleur molleur is offline
Senior Member
 
Join Date: Jun 2015
Posts: 1,401
molleur is on a distinguished road
Default

Here you go, without comment.20180810_113816.jpg
Reply With Quote
  #60  
Old 10th August 2018, 17:08
Barber's Avatar
Barber Barber is offline
Senior Member
 
Join Date: Apr 2016
Location: Camberley
Posts: 972
Barber is on a distinguished road
Default

Thanks, good to see what can be dealt with
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +0. The time now is 14:19.

copyright © madabout-kitcars.com 2000-2024
terms and conditions | privacy policy