No spark :(
Hello
I am trying to get my engine to start for the first time in years.(its a kit hence the long period of time)
It is a 1.6 sierra ohc.(Creg)
My main problem is that i have no spark
I have put new Spark plugs, HT leads, Dizzy cap, rotor arm, ignition module(amp) and a new ignition coil on and still no spark
Ive cut out the suppressor, the rotor arm spins when starting and it doesnt have a alarm etc on.
Ive cleaned the ignition trigger (well kind of lol but i do get an ohm reading through it)
at the ignition coil when the ignition is on i get 12v from the black wire (+side) and only 3 from the (2)green wires (-side) i get 12v from the ht lead goin to the dizzy cap but when i put a electric test on rather then the multimeter the bulb doesnt light up.
so if i havent baffled you with my problem or bad explanation pleasssseeee help
Any help would be much appreciated
Cheers
Jon
|