Remote servo help can anyone advise me ?

[kit car man]

Hi all i am new here as you can see i thought one of you may be able to help me i have had to remove my servo from my project car and installed a custom pedal box i have found out i will need a servo on the car to pass an mot even though i am sure the brakes are fine.

Can anyone advise me how a remote servo connects to a pedalbox assembly as i have no experience

KCM

[limpabit]

Hi and welcome.

On the Rover type servo, it is bolted to the bulkhead using 4 nuts and bolts. The servo has a rod that connects to the pedal using a pin and clip.

[kit car man]

Originally Posted by limpabit

Hi and welcome.

On the Rover type servo, it is bolted to the bulkhead using 4 nuts and bolts. The servo has a rod that connects to the pedal using a pin and clip.

Hi thanks for the reply i thought i could put a remote one anywhere ? I have no room on the bulkhead thats why i removed the factory one i am running a custom pedal box as well

Kcm

[limpabit]

I do apologies. I miss ready your post.

I'm not sure how a remote servo would work. But these links might help.

http://shop1.actinicexpress.co.uk/sh...Servo__Remote_

http://www.s-v-c.co.uk/prod/drservo.html

http://www.middlebank.co.uk/Servo.htm