Are you madabout kit cars      
 "We've Got Kit Cars Covered" Information about Madabout-Kitcars.com Contact Madabout-Kitcars.com         Home of UK kit cars - madabout-kitcars.com Various kit car write ups All the latest kit car news Kit car related and general discussion

Search
Manufacturers
Kit Cars
Kit Car Data sheets
Picture Gallery
SVA Knowledgebase
Clubs & Communities
Build cost estimator
Kit cars for sale
Knowledge Base 
KitcarUSA.com
Classic-Kitcars.com
 

Go Back   Madabout Kitcars Forum > Mad Build Area > Sammio Builds and discussions

Sammio Builds and discussions Sammio bodied car builds and specials

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 16th January 2019, 20:37
Mister Towed's Avatar
Mister Towed Mister Towed is offline
Senior Member
 
Join Date: Jul 2011
Posts: 5,328
Mister Towed is on a distinguished road
Default

The methanol/water injection system was something I'd always been keen to put together and try. I'd come across it in the RAF as it was fitted to the Harriers we used to take the Falklands back and I knew it had been fitted to the Supermarine Spitfires we sent for the Russians to use against Adolf, which meant they could run on the sub-standard, low octane fuel that was all the Russians had available.

Without going into too much detail about the why's and wherefores, it did work very well, mostly - the engine ran much smoother and economy improved by about 10mpg with it switched 'on', but the very fine nozzle needed for a 100hp motor kept clogging up despite the filters in the system.

I removed it and sold it on ebay, for about £110 as I recall, which was around double what I'd spent on the parts (don't pay a tuning specialist £200 for a 'water injection' pump, it's actually a £30 fish-pond pump put to better use).

If I fit another low powered car with Methanol/Water injection, which I probably will, I'll go with a gravity fed exhaust manifold/capillary system, which is obviously much simpler than the high pressure pump, solenoid and superfine nozzle I used last time.

I would definitely be interested in relieving you of a fibreglass bulkhead. PM me with the deal you'd consider (hopefully a simpler one than Brexit) and we'll sort something out.
Reply With Quote
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +0. The time now is 05:01.

copyright © madabout-kitcars.com 2000-2024
terms and conditions | privacy policy