Are you madabout kit cars      
 "We've Got Kit Cars Covered" Information about Madabout-Kitcars.com Contact Madabout-Kitcars.com         Home of UK kit cars - madabout-kitcars.com Various kit car write ups All the latest kit car news Kit car related and general discussion

Search
Manufacturers
Kit Cars
Kit Car Data sheets
Picture Gallery
SVA Knowledgebase
Clubs & Communities
Build cost estimator
Kit cars for sale
Knowledge Base 
KitcarUSA.com
Classic-Kitcars.com
 

Go Back   Madabout Kitcars Forum > Mad Build Area > Phantom GTR/Vortex Builds

Phantom GTR/Vortex Builds In a Vortex with your Phantom build? Share your build experiences here.

Reply
 
Thread Tools Display Modes
  #1  
Old 20th July 2006, 22:03
kenmorton's Avatar
kenmorton kenmorton is offline
Senior Member
Enthusiast
 
Join Date: Apr 2006
Location: Wrexham, N. Wales
Posts: 190
kenmorton is on a distinguished road
Default Pedal positions

Another question - this time about pedal positions.
When you mount the pedals (with the spacer blocks when you remember them - dohhhh!) did your pedals line up or do they need some messing about with ?
At the moment my clutch pedal is about 40mm higher than the brake pedal which is about 30mm higher than the accelerator pedal. There is no way I could get them all to line up just with adjusting the brake stop switch and a travel adjustment bolt on the clutch. Looks like I might have to either sand the blocks to triangular profiles or use spacer washers under the pedal brackets.
Did everone else have the same problems and if so how did you get over it ?
Reply With Quote
Available from eBay
  #2  
Old 21st July 2006, 10:42
Aprisa Aprisa is offline
Junior Member
 
Join Date: Oct 2003
Location: Dodford, WORCS
Posts: 23
Aprisa is on a distinguished road
Default

TBH Ken the pedals are really badly positioned as the rover box is too wide to allow for space to the left for your foot, hence you wedge it under the clutch!

My pedals came out ok height wise on the brake and clutch but the acc is as you say a bit low for Heel & toe.

I am hoping someone will fit an after market pedal box which I can try and see if it is better? although still can't decide whether to keep the car or not so may be academic.
Reply With Quote
  #3  
Old 25th July 2006, 23:20
kenmorton's Avatar
kenmorton kenmorton is offline
Senior Member
Enthusiast
 
Join Date: Apr 2006
Location: Wrexham, N. Wales
Posts: 190
kenmorton is on a distinguished road
Default

Put the spacers under the pedal boxes now and tried to adjust clutch / brake heights and they are a better now but still not ideal.
The difference between tha brake and accelerator is now a bit closer, maybe 25mm so with a nice solid brake it would be o.k. height wise for heel and toe but the pedals are so far apart I would have to be wearing my work boots to be able to reach both.
Clutch still seems a bit too high.
I have now also got too much travel on the accelerator. Need 26mm for closed to wot but will get 31mm with accelerator as positioned. So either need pedal stop - has any one else had to put one in and if so what have you used and how ? - or else modify the actuator arm at the throtle body.
Actuator arm mods are probably favorite as it will give me a more progressive accelerator travel.
What are everyone elses relative pedal heights ?
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +0. The time now is 11:36.

copyright © madabout-kitcars.com 2000-2024
terms and conditions | privacy policy