Are you madabout kit cars      
 "We've Got Kit Cars Covered" Information about Madabout-Kitcars.com Contact Madabout-Kitcars.com         Home of UK kit cars - madabout-kitcars.com Various kit car write ups All the latest kit car news Kit car related and general discussion

Search
Manufacturers
Kit Cars
Kit Car Data sheets
Picture Gallery
SVA Knowledgebase
Clubs & Communities
Build cost estimator
Kit cars for sale
Knowledge Base 
KitcarUSA.com
Classic-Kitcars.com
 

Go Back   Madabout Kitcars Forum > Mad Build Area > Tribute Automotive Builds

Tribute Automotive Builds Discuss your Tribute kit build

Reply
 
Thread Tools Display Modes
  #1  
Old 11th July 2012, 00:34
tonyt tonyt is offline
Senior Member
 
Join Date: Jul 2012
Posts: 576
tonyt is on a distinguished road
Default Planning a Tribute Build

After looking at rusty Uk examples I have just bought an imported MX 5, clean example 1993 imported 2008, its a 1.8 V-spec, low km, with all usual refinements and no rust, it had a suspected head gasket problem, but with investigation it was a heater hose and thermo fan switch, now sorted.

Trouble is everybody is telling me its too good to pull apart for a kit, and I love drieving it especialy with the roof down when we eventualy get a summer. I love the look the Tribute 250 as it is but I would like the soft top option, not sure the Italia is for me, so Tribute it is, also prefer the new front and de vented rear so I'll keep watching this space.

Last edited by tonyt; 20th October 2012 at 21:37..
Reply With Quote
Available from eBay
  #2  
Old 11th July 2012, 20:11
Tribute Automotive's Avatar
Tribute Automotive Tribute Automotive is offline
Senior Member
 
Join Date: Oct 2010
Posts: 1,622
Tribute Automotive is on a distinguished road
Default

Quote:
Originally Posted by tonyt View Post
Trouble is everybody is telling me its too good to pull apart for a kit, and I love driving it especialy with the roof down.......
Welcome Tony

Glad to hear you like the MX250. We have been doing a little more work on the "buck" for the soft-top version and will be ready to mould next week. All we need now is a deposit from someone that has just bought a really nice MX5!!!! If you post some pictures of your car I am sure you will get some support for your conversion.



You can see more pictures of the build on the "Convertible MX250 " tread. Looking forward to hearing more from you.
Reply With Quote
  #3  
Old 12th July 2012, 00:55
tonyt tonyt is offline
Senior Member
 
Join Date: Jul 2012
Posts: 576
tonyt is on a distinguished road
Default

Thanks for the warm welcome Chris, I'll get some pictures posted, like the way things are progressing.

Last edited by tonyt; 15th July 2012 at 16:16..
Reply With Quote
  #4  
Old 12th July 2012, 19:38
Tribute Automotive's Avatar
Tribute Automotive Tribute Automotive is offline
Senior Member
 
Join Date: Oct 2010
Posts: 1,622
Tribute Automotive is on a distinguished road
Default

Hi Tony.

Nearly there!

Reply With Quote
  #5  
Old 12th July 2012, 20:27
garyh garyh is offline
Senior Member
 
Join Date: Jun 2011
Location: birchington, kent
Posts: 1,766
garyh is on a distinguished road
Default

Is this yours then, Tony...

What are the rear lights, they look different in this shot?
Reply With Quote
  #6  
Old 13th July 2012, 12:03
tonyt tonyt is offline
Senior Member
 
Join Date: Jul 2012
Posts: 576
tonyt is on a distinguished road
Default

No it not mine, its belongs to Chris at Tribute, I've not even started yet.

Last edited by tonyt; 20th October 2012 at 21:38..
Reply With Quote
  #7  
Old 16th July 2012, 17:46
tonyt tonyt is offline
Senior Member
 
Join Date: Jul 2012
Posts: 576
tonyt is on a distinguished road
Default

Deposit in hand on this, looks very nice.
Reply With Quote
  #8  
Old 18th July 2012, 19:35
tonyt tonyt is offline
Senior Member
 
Join Date: Jul 2012
Posts: 576
tonyt is on a distinguished road
Default

Reply With Quote
  #9  
Old 18th July 2012, 19:51
tonyt tonyt is offline
Senior Member
 
Join Date: Jul 2012
Posts: 576
tonyt is on a distinguished road
Default

Lengthy phone call with Chris today, great support, happy to pay a deposit on a kit, having trouble with photos of the base car, now have them on photo bucket but don't know how to link them.
Incidently for anyone doing rear brakes the rear calipers on a Mk1 are retracted by removing at 12mm bolt (the one next to the handbrake mounting bracket) there is an allan key bolt undernieth this that will wind the caliper back to alow new pads, when my G clamp started bending whilst trying to retract them I thought someting was wrong, eg. siezed caliper, checked online, this is common even garages get it wrong, who would hide that under the head of a bolt?
Reply With Quote
  #10  
Old 18th July 2012, 20:02
Tribute Automotive's Avatar
Tribute Automotive Tribute Automotive is offline
Senior Member
 
Join Date: Oct 2010
Posts: 1,622
Tribute Automotive is on a distinguished road
Default

Hi Tony, good to speak to you today, your base car looks perfect for the conversion with all that lovely tan leather.

If you have your images already uploaded to Photobucket, go to your Album and under each picture that you roll over there is a list of 4 codes below the picture, click on the bottom "IMG CODE" part and it will say "copied".
You can now go to the Forum and "paste" the code into the meassage you are writing, you can have as many pictures as you like in each message.

Thank you for your order, I am sending you an email reference your deposit.
Reply With Quote
  #12  
Old 19th July 2012, 17:12
Tribute Automotive's Avatar
Tribute Automotive Tribute Automotive is offline
Senior Member
 
Join Date: Oct 2010
Posts: 1,622
Tribute Automotive is on a distinguished road
Default



Reply With Quote
  #13  
Old 21st September 2012, 21:08
tonyt tonyt is offline
Senior Member
 
Join Date: Jul 2012
Posts: 576
tonyt is on a distinguished road
Default

Picked up my kit today very pleased, thanks to Chris and Dan for all the advice, oh and I forgot to say thanks for the tea.
Reply With Quote
  #14  
Old 23rd September 2012, 17:07
Tribute Automotive's Avatar
Tribute Automotive Tribute Automotive is offline
Senior Member
 
Join Date: Oct 2010
Posts: 1,622
Tribute Automotive is on a distinguished road
Default

Quote:
Originally Posted by tonyt View Post
Picked up my kit today very pleased, thanks to Chris and Dan for all the advice, oh and I forgot to say thanks for the tea.
It was good to meet you and I'm glad you are pleased with the kit.

It's always exciting when the first of a new type of kit is due for collection, and I am really pleased with the way the new rear end fits and looks now.



Please keep us informed of your progress.
Reply With Quote
  #15  
Old 6th October 2012, 01:09
tonyt tonyt is offline
Senior Member
 
Join Date: Jul 2012
Posts: 576
tonyt is on a distinguished road
Default

New MOT on the base car this week lights fitted, vents cut out and kit trimmed, just need a dry day off now to start.
Reply With Quote
  #16  
Old 6th October 2012, 01:34
tonyt tonyt is offline
Senior Member
 
Join Date: Jul 2012
Posts: 576
tonyt is on a distinguished road
Default

Got the kit home.

Last edited by tonyt; 6th October 2012 at 01:38..
Reply With Quote
  #17  
Old 6th October 2012, 01:35
tonyt tonyt is offline
Senior Member
 
Join Date: Jul 2012
Posts: 576
tonyt is on a distinguished road
Default

Started on the rear end.

Last edited by tonyt; 6th October 2012 at 01:39..
Reply With Quote
  #18  
Old 6th October 2012, 01:36
tonyt tonyt is offline
Senior Member
 
Join Date: Jul 2012
Posts: 576
tonyt is on a distinguished road
Default

One eye and some vents cut.

Last edited by tonyt; 6th October 2012 at 01:39..
Reply With Quote
  #19  
Old 6th October 2012, 08:58
Paul L's Avatar
Paul L Paul L is offline
Senior Member
 
Join Date: Feb 2012
Location: Wembley, London
Posts: 4,897
Paul L is on a distinguished road
Default

tonyt - First of all, good luck with your build.

I'm building a Sammio Cordite on the forum section "next door" and love this photo...



It makes my front drive build area look quite normal.



Jokes aside, I do have one question / request for you...

I have bought very similar (if not the same) rear stop/tail & indicator lights.

Is there any chance you can take a picture from the other side to show how you have held them in place?

Cheers, Paul.
Reply With Quote
  #20  
Old 6th October 2012, 01:37
tonyt tonyt is offline
Senior Member
 
Join Date: Jul 2012
Posts: 576
tonyt is on a distinguished road
Default

All lights fitted and all vents cut.

Last edited by tonyt; 6th October 2012 at 01:43..
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +0. The time now is 03:55.

copyright © madabout-kitcars.com 2000-2020
terms and conditions | privacy policy