|
Sammio Builds and discussions Sammio bodied car builds and specials |
5th November 2019, 16:27
|
|
Senior Member
Enthusiast
|
|
Join Date: Dec 2006
Posts: 1,130
|
|
Fitted hinges to the bonnet.
Also fitted the bonnet side panels.
.
Both side panels need some sort of lip to cover the bottom edge but for now good enough for the MOT tester.
|
17th November 2019, 06:29
|
|
Senior Member
|
|
Join Date: Feb 2012
Location: Wembley, London
Posts: 5,071
|
|
Mike – Do you have a final colour in mind for this pick up?
|
17th November 2019, 18:59
|
|
Senior Member
Enthusiast
|
|
Join Date: Dec 2006
Posts: 1,130
|
|
Quote:
Originally Posted by Paul L
Mike – Do you have a final colour in mind for this pick up?
|
I have 2 colours in mind.
Grey with black trim.
Rust with black trim.
I'll decide when it's complete
|
16th December 2019, 18:13
|
|
Senior Member
Enthusiast
|
|
Join Date: Dec 2006
Posts: 1,130
|
|
I'v been looking for a pair of Morris Minor door tops to convert to fit the doors giving me an opening window.
But having been unsuccessful I purchased some thin steel channel and made a pair.
I also added an in-fill to the door top surrounds
I re-enforced the door bottom which not only helped stop the fiberglass door flexing but also gave me some where to fit the window winder and door latch.
On the mechanical side we have now got it running better and freed off the clutch so the truck will now move under it's own power!
No more pushing about
|
28th December 2019, 17:31
|
|
Senior Member
Enthusiast
|
|
Join Date: Dec 2006
Posts: 1,130
|
|
Spent so time on the interior of the pick-up ready for the final fitting of the seats and belts.
|
25th January 2020, 17:30
|
|
Senior Member
Enthusiast
|
|
Join Date: Dec 2006
Posts: 1,130
|
|
The front of the truck was always to high.
So we replaced the front coil-over shocks with some smaller ones we had left over from the front of the "D" type.
This shows the difference, left has the new smaller coil-over shock fitted.
Again.
I think it's down about 50mm, just hope the front will clear the local speed humps!!!!
|
10th February 2020, 17:14
|
|
Senior Member
Enthusiast
|
|
Join Date: Dec 2006
Posts: 1,130
|
|
I'v been trying to sort out a safe way to fit the visor.
I finally settled on some exhaust bobbins which allow the air flow to pass under the visor .
I'll tidy the fitting up later.
|
10th February 2020, 18:47
|
Senior Member
|
|
Join Date: Jun 2015
Posts: 1,401
|
|
I like that!
|
15th February 2020, 19:48
|
|
Senior Member
Enthusiast
|
|
Join Date: Dec 2006
Posts: 1,130
|
|
We wanted to get the truck all one colour to see what it looks like so we used primer.
Still loads of work to do on the rest of the bodywork but the single colour shows the potential.
|
23rd February 2020, 10:04
|
|
Senior Member
|
|
Join Date: Feb 2012
Location: Wembley, London
Posts: 5,071
|
|
Mike – Getting the truck in one colour does make a big difference.
Also, good to see you are already making use of the pickup bed.
Good luck, Paul.
|
28th March 2021, 18:36
|
|
Senior Member
Enthusiast
|
|
Join Date: Dec 2006
Posts: 1,130
|
|
|
28th March 2021, 20:40
|
Senior Member
|
|
Join Date: Jun 2015
Posts: 1,401
|
|
Congrats!
|
29th March 2021, 12:12
|
|
Senior Member
|
|
Join Date: Sep 2011
Posts: 1,447
|
|
looking good
|
29th March 2021, 21:24
|
Senior Member
|
|
Join Date: Apr 2011
Posts: 284
|
|
Respect!
|
2nd June 2021, 13:51
|
|
Senior Member
Enthusiast
|
|
Join Date: Dec 2006
Posts: 1,130
|
|
Can't stop playing with it!!
Fitted a heater
The blower to the cab is brilliant but the de-mist sucks! .
You-Tube test drive !!
https://www.youtube.com/watch?v=iOUFmqEQT74
Now correctly registered with DVLA as Reliant - Pick-up - 2 seats - Grey !
|
2nd June 2021, 14:04
|
Senior Member
|
|
Join Date: Jun 2015
Posts: 1,401
|
|
Fantastic!
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT +0. The time now is 09:59.
|