Are you madabout kit cars      
 "We've Got Kit Cars Covered" Information about Madabout-Kitcars.com Contact Madabout-Kitcars.com         Home of UK kit cars - madabout-kitcars.com Various kit car write ups All the latest kit car news Kit car related and general discussion

Search
Manufacturers
Kit Cars
Kit Car Data sheets
Picture Gallery
SVA Knowledgebase
Clubs & Communities
Build cost estimator
Kit cars for sale
Knowledge Base 
KitcarUSA.com
Classic-Kitcars.com
 

Go Back   Madabout Kitcars Forum > Mad Build Area > Old No.7 Builds

Old No.7 Builds 275 kits from Dan

Reply
 
Thread Tools Display Modes
  #301  
Old 26th May 2019, 06:36
Welshkiwi Welshkiwi is offline
Senior Member
 
Join Date: Aug 2017
Location: Auckland, New Zealand
Posts: 242
Welshkiwi is on a distinguished road
Default Fail of yesterday fading away - (slowly)

Hey guys, back at it today with a long day on the project.
More glassing on the back end so that is coming along, at least now can scarf the top surface and glass/fill where I need to.

Fuel filler still in work, made a bracket for it to sit on securely but it looks like it wants to sit lower when the shell is back on, so another try at that soon.

Rear boot extension glassing was finished yesterday to profile it better with the
rear of the car - Ran out of rivets during fitting but all bonded on now. Just needs a bit of tidying, more rivets and carpeting long term. the pictures show the aluminium brackets I have used to fix to the bumper (recycling at its best as this was reused material that I cut off the front bumper). Front screen top glassing finished now and the roof sits in a much better place.

IMG_20190526_155640


IMG_20190526_155634

IMG_20190526_155625

IMG_20190526_155616
Reply With Quote
  #302  
Old 26th May 2019, 22:38
Egdik Egdik is offline
Senior Member
 
Join Date: Jul 2014
Location: Herts
Posts: 102
Egdik is on a distinguished road
Default

Nice recycling.

As time goes by one gets over the pain of failures - we all do it, but try not to repeat them . . . The overall cost is not significant or worrisome in the big picture.

Progress is a great motivator.
Reply With Quote
  #303  
Old 30th May 2019, 03:45
Welshkiwi Welshkiwi is offline
Senior Member
 
Join Date: Aug 2017
Location: Auckland, New Zealand
Posts: 242
Welshkiwi is on a distinguished road
Default

Quote:
Originally Posted by Egdik View Post
Nice recycling.

As time goes by one gets over the pain of failures - we all do it, but try not to repeat them . . . The overall cost is not significant or worrisome in the big picture.

Progress is a great motivator.
Cheers Kidge,

This week a bit slower as I am still having issues with the positioning of the fuel filler. With the size of the tube and filler and the required bend radius I am struggling to keep it off the chassis. So I have changed tack, started the strengthening and packing/fit position of the rear shell so that gives me as much room as humanely possible to play with. I am optimistic but certainly partially frustrated!

I do have made the initial prototype of the rear brake light pod that will sit on the parcel shelf and it looks good, also today gave the green light for the manufacture of the side trims. Having them formed up by a local metal company in bright stainless and then finishing off the welding/final fabrication with a good mate of mine. Things moving though and a long weekend coming up which is raining most of the time so plenty of spare hours can be spent on it.......
Reply With Quote
  #304  
Old 11th June 2019, 06:07
Welshkiwi Welshkiwi is offline
Senior Member
 
Join Date: Aug 2017
Location: Auckland, New Zealand
Posts: 242
Welshkiwi is on a distinguished road
Default

A quick general update, hopefully some photos at the end of the weekend as i don’t like showing “part way” mods!

I am using galv square tube and building up the back end extension support area with that and fibreglass. Nearly there. The backend needed to be approx 20mm higher so the front end looked good on the roof. Have also supported the boot extension wings with some bonded in and fibreglassed over 6mm rod. Stiffened up nicely.
As far as the fuel filler that is looking pretty good but I won’t be able to check that until the backend back on and trialled.
I have my sill trims back from production, look really good profile. My job now is to chamfer the ends, make end plates for those and weld in plus weld in the tabs/bolts to hold them on. Keeping on keeping on!
Reply With Quote
  #305  
Old 9th July 2019, 09:41
Welshkiwi Welshkiwi is offline
Senior Member
 
Join Date: Aug 2017
Location: Auckland, New Zealand
Posts: 242
Welshkiwi is on a distinguished road
Default

Some photos soon, promise. Cert guy has given clearance today for body structure mods that I have done. So all go to get the rear finalled and on.
Am currently working on the stainless trims, welding should go on this week. Bumpers will be wrapped with vinyl chrome week after. Style 5 alloys look good with 205/65/15 rubber on them. A bit more glassing to do on the rear end and then I can flowcoat it.
Chris and Dan sending some more stuff through this week that I needed/wanted so definitely optimistic of on the road around end of sept/early oct at this rate.... can’t come too quickly!
Reply With Quote
  #306  
Old 20th July 2019, 04:26
Welshkiwi Welshkiwi is offline
Senior Member
 
Join Date: Aug 2017
Location: Auckland, New Zealand
Posts: 242
Welshkiwi is on a distinguished road
Default Lots of work going on

]Hi guys, been a cack load of work going on over the last few weeks and I am knackered!
The bits in work:
- Bumpers filled/sprayed and ready to vinyl wrap this week
- Exhaust resonators (ala the 275) in work but initial manufacture done - see pic (They will eventually be polished tips/redband and black painted as per the 275 original car - Maybe with ANSA badges) See capture pic for what trying to achieve.
- Exhaust hangers (again as per the capture pic - Fezza originals ordered from Germany on on their way) the other pic shows I have strengthened where the exhaust hangers will go - Where the rivets are behind the panel is T6-alclad aluminium plate bonded and riveted in so will have good structure to hang off.
- Alloys and rubber all sorted - 205/65/15 with ET20 offset - looks good possibly not to have to widen the track after all at back end.
- Glassing virtually finished on back end - trialling final fits tomorrow
- Blocked off rear light areas and "splash shields" manufactured from fglass and fitted.
- Flowcoat inside rear end started today.
- Sills nearly completed, end caps done on trims, getting retention bolts welding done on this weekend and trial fits hopefully next week.
- Door window seals fitted

Flickr for some reason not working so a few photos added as per below.

Cheers.
Attached Images
File Type: jpg Exhaust Hanger support.jpg (93.4 KB, 18 views)
File Type: jpg Exhaust resonators trial.jpg (92.6 KB, 18 views)
File Type: jpg Style 5 Alloys.jpg (92.1 KB, 19 views)
File Type: jpg Capture.JPG (56.4 KB, 20 views)

Last edited by Welshkiwi; 20th July 2019 at 04:41..
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +0. The time now is 03:20.

copyright madabout-kitcars.com 2000-2019
terms and conditions | privacy policy