Are you madabout kit cars      
 "We've Got Kit Cars Covered" Information about Madabout-Kitcars.com Contact Madabout-Kitcars.com         Home of UK kit cars - madabout-kitcars.com Various kit car write ups All the latest kit car news Kit car related and general discussion

Search
Manufacturers
Kit Cars
Kit Car Data sheets
Picture Gallery
SVA Knowledgebase
Clubs & Communities
Build cost estimator
Kit cars for sale
Knowledge Base 
KitcarUSA.com
Classic-Kitcars.com
 

Go Back   Madabout Kitcars Forum > Mad Build Area > Marlin Sportster, Cabrio, Berlinetta and Roadster builds

Marlin Sportster, Cabrio, Berlinetta and Roadster builds Enthused or Confused about your vintage Marlin build? Ask away here or show off your build.

Reply
 
Thread Tools Display Modes
  #21  
Old 17th March 2014, 13:36
denniswpearce denniswpearce is offline
Senior Member
 
Join Date: Dec 2010
Posts: 287
denniswpearce is on a distinguished road
Default

The seats in my Sportster were fixed direct to the floor pan with just oversize washers on the bottom. Obviously got through its test with the Ministry just like that.
Reply With Quote
  #22  
Old 17th March 2014, 23:19
timbo timbo is offline
Senior Member
Enthusiast
 
Join Date: Feb 2008
Location: Bristol
Posts: 272
timbo is on a distinguished road
Default

I used 100mm square plates under the rear seat mounting bolts to spread the load in case of a front collision, as surely the seat would want to throw forward (regardless of seat belt anchoring points) and I wasn't convinced the floor panels by themselves were of sufficient strength. No questions from the IVA man.
Although by spot welding the bolts to the seat runners I could just drop the seats into the holes into the floor panels and bolt them from underneath the car. Simples
Reply With Quote
  #23  
Old 18th March 2014, 08:03
peterux's Avatar
peterux peterux is online now
Senior Member
Enthusiast
 
Join Date: Mar 2005
Posts: 2,883
peterux is on a distinguished road
Default

This is an interesting area where the new IVA seems to be a little less onerous than the old SVA manual.
I fitted steel strengthening bars across the floor and bolted the bars to the chassis but I couldn't remember why?
So I went back to a copy of the old SVA manual which also said...
Seats are required to be secured firmly to the
chassis or other obvious load bearing parts of the
vehicle structure.

I think at the time, I was probably worried that the floors would not be considered part of 'the chassis or other load bearing part...'. The key word 'chassis' now seems to have been dropped from the IVA requirement and experience suggests that spreader plates are regarded as sufficient.

The other point to note is that I left fixing my floors until towards the end of my build and they do become much stiffer once pop riveted all around the edge.
Reply With Quote
  #24  
Old 6th May 2014, 22:00
6981marlin 6981marlin is offline
Junior Member
 
Join Date: Jun 2009
Posts: 17
6981marlin is on a distinguished road
Default

IMAG1186.jpg

I have found a nice pair of mx5 seats, and they work a treat. Thank you for the info.

Ryan
Reply With Quote
  #25  
Old 14th May 2014, 08:33
Cammy Cammy is offline
Junior Member
 
Join Date: Oct 2012
Location: Aberdeenshire
Posts: 24
Cammy is on a distinguished road
Default Suzuki Cappuccino seats available!

Anyone interested in a pair of Suzuki Cappuccino seats?

The guys at the address below are offerring a pair with nbo rips for 200 which seems like a pretty good deal!

Contact;

Suzuki-Cappuccino-parts [shop-147834@fwsemail.com]

Cheers

Cammy
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +0. The time now is 23:46.

copyright madabout-kitcars.com 2000-2020
terms and conditions | privacy policy