Are you madabout kit cars      
 "We've Got Kit Cars Covered" Information about Madabout-Kitcars.com Contact Madabout-Kitcars.com         Home of UK kit cars - madabout-kitcars.com Various kit car write ups All the latest kit car news Kit car related and general discussion

Search
Manufacturers
Kit Cars
Kit Car Data sheets
Picture Gallery
SVA Knowledgebase
Clubs & Communities
Build cost estimator
Kit cars for sale
Knowledge Base 
KitcarUSA.com
Classic-Kitcars.com
 

Go Back   Madabout Kitcars Forum > Mad Build Area > Old No.7 Builds

Old No.7 Builds 275 kits from Dan

Reply
 
Thread Tools Display Modes
  #1  
Old 12th September 2017, 04:14
Welshkiwi Welshkiwi is offline
Junior Member
 
Join Date: Aug 2017
Location: Auckland, New Zealand
Posts: 26
Welshkiwi is on a distinguished road
Default Welsh Kiwi's Build Thread - 275GTB

Hi guys,

This is the initial post as I have threatened to make on my build. A long way to go with this as Chris and Dan have some work to do to marry a set of panels up with my donor, but I will putting the short delay to good use with the donor.
Just a quick thanks to Kidge (Edgik), who without his sheer determination in getting something off the ground for this for many years, I would be left in New Zealand unable to get any kit built because of frontal impact regs. So Edgik - Cheers

See attached photos, 1999 2.8 Z3 (i know it has 3.0 on the back and no one has any history why)

Basic Plan for the kit will be:

No badges so we are not doing a replica, apart from possibly a custom "Ferrari-esque" Badge on the rear and maybe a couple of "disegno di Pininfarina" on the side as a homage to the great man and the work he did with Scaglietti. The car will be a homage to the era, not a replica.

Intended at present to be Coupe, metallic grey/gun metal with grille and chrome ornaments such as bullet mirrors, bumpers, clear front indicators, teardrops on the side and round taillights.
Interior will remain reasonably stock as I have lucked in with a beautiful black/grey interior with wood effect console, chrome trim on the gauges and good spec in electric condiments and side airbags etc. Will show pictures when I get more underway. Wooden rim steering wheel will eventuate.

Final trappings will lay 4 pipe exhaust underneath "with the required orchestra" and wire wheels and appropriate rubber. I am hoping to keep the donor originals whilst I am running round "in work and in primer" (As they are nice already), when the BMW centre's disappear. I will need a bit of time in the primer coat to normalise the "green" fibreglass and get all the residual stresses and cracking out from the bolt/bonding process and the New Zealand UV rays out. Not going to be happy with a few $K's of paint having cracks in it after a few months!

Looking forward to keeping you all in the loop with this. You are more than welcome to pay me a visit during the build, UBER fare though may be a bit restrictive for you though!

Cheers - Here we go!
Attached Images
File Type: jpg 20170909_130023a.jpg (93.3 KB, 28 views)
File Type: jpg 20170909_130049b.jpg (91.1 KB, 22 views)
File Type: jpg Capture.JPG (16.9 KB, 22 views)
Reply With Quote
Available from eBay
  #2  
Old 12th September 2017, 05:42
Paul L's Avatar
Paul L Paul L is offline
Senior Member
 
Join Date: Feb 2012
Location: Wembley, London
Posts: 3,958
Paul L is on a distinguished road
Default

WelshKiwi – Sounds like a good plan to me.

I know the development of Kidge’s car took a lot of time and effort, but it looks well worth it to me.



I also followed the approach of getting my car on the road without paint first.
( Although taking it back off the road for paint has taken longer than I expected. )

Good luck, Paul.
Reply With Quote
  #3  
Old 12th September 2017, 06:37
Welshkiwi Welshkiwi is offline
Junior Member
 
Join Date: Aug 2017
Location: Auckland, New Zealand
Posts: 26
Welshkiwi is on a distinguished road
Thumbs up

Cheers Paul. A plan is only a point to deviate from, but at the moment I think I have it as covered as we can for the spec. Only time will tell! Cheers for the photo, the more I look at the lines of kidges, the more I want to get underway. Have to make sure I give it the respect it deserves. Cheers Mark.
Reply With Quote
  #4  
Old 12th September 2017, 07:38
Jaguartvr's Avatar
Jaguartvr Jaguartvr is offline
Senior Member
 
Join Date: Jan 2014
Location: Egham, Surrey
Posts: 979
Jaguartvr is on a distinguished road
Default

Will you be following Kidges window design?
I wonder if a coupe side window could work?
Did Chris take splash moulds of the bumpers?

Probably won't be a problem in NZ but on my Griffith I had terrible problems with the headlight lenses misting up.
Reply With Quote
  #5  
Old 12th September 2017, 08:19
Welshkiwi Welshkiwi is offline
Junior Member
 
Join Date: Aug 2017
Location: Auckland, New Zealand
Posts: 26
Welshkiwi is on a distinguished road
Default

Quote:
Originally Posted by Jaguartvr View Post
Will you be following Kidges window design?
I wonder if a coupe side window could work?
Did Chris take splash moulds of the bumpers?

Probably won't be a problem in NZ but on my Griffith I had terrible problems with the headlight lenses misting up.
Hi JagTvr. Windows are likely to be original Z3 to keep the window function etc. Chris/Dan are working on the options for this. Coupe side window probably would work, just some changes to the mould would be required.
Chris has moulds of original bumpers so should be able to supply. Noted about the headlight covers. If I get an issue I may carry out some mods underneath to duct a small amount of air into the interior which should sort that issue. The lenses are attached externally and not internally like the Griffith, so it may not have those issues. Cheers.
Reply With Quote
  #6  
Old 12th September 2017, 14:11
Barber's Avatar
Barber Barber is offline
Senior Member
 
Join Date: Apr 2016
Location: Camberley
Posts: 394
Barber is on a distinguished road
Default

Good news, exciting, and good luck for your journey.
Reply With Quote
  #7  
Old 13th September 2017, 21:03
Paul L's Avatar
Paul L Paul L is offline
Senior Member
 
Join Date: Feb 2012
Location: Wembley, London
Posts: 3,958
Paul L is on a distinguished road
Default

WelshKiwi - Hi Mark,

This video popped up in mythe "Recommended" section of YouTube the other day.

If you haven't seen it before, it might also help with your motivation.

https://www.youtube.com/watch?v=DzM9xcGAhbE

Good luck, Paul.
Reply With Quote
  #8  
Old 14th September 2017, 06:17
Mister Towed's Avatar
Mister Towed Mister Towed is offline
Senior Member
 
Join Date: Jul 2011
Posts: 4,619
Mister Towed is on a distinguished road
Default

Great short film Paul. Love the line '...who needs a radio?' He really sums up what classic car ownership is all about whether it's a ten million dollar Ferrari or a home built special.

Really beginning to warm to the looks of the 275 too, first impressions for me were that it's about a decade too young looking for my taste, but it's really grown on me as this thread has evolved. Would be nice to see it go into production, whether that be as a kit or turnkey builds.
Reply With Quote
  #9  
Old 14th September 2017, 06:45
Welshkiwi Welshkiwi is offline
Junior Member
 
Join Date: Aug 2017
Location: Auckland, New Zealand
Posts: 26
Welshkiwi is on a distinguished road
Default

Quote:
Originally Posted by Paul L View Post
WelshKiwi - Hi Mark,

This video popped up in mythe "Recommended" section of YouTube the other day.

If you haven't seen it before, it might also help with your motivation.

https://www.youtube.com/watch?v=DzM9xcGAhbE

Good luck, Paul.
Thanks Paul, I think I have seen this about 5 times in the last week! There is a lot of emotion and romance in these old cars. I must admit I am starting to get a bit of that myself and I am only building a kit! Good news today, hoping that the kit will be produced and landed in NZ by around Feb. So I really have to get into sourcing bits. Have the headlight covers already, just need to put some time into door handles and rear tailights/side repeaters as the "main trouble" bits. Cheers Mark.
Reply With Quote
  #10  
Old 14th September 2017, 08:10
Lucky@LeMans Lucky@LeMans is offline
Senior Member
 
Join Date: Aug 2012
Posts: 654
Lucky@LeMans is on a distinguished road
Default

Quote:
Originally Posted by Welshkiwi View Post
Hi guys,

This is the initial post as I have threatened to make on my build. A long way to go with this as Chris and Dan have some work to do to marry a set of panels up with my donor, but I will putting the short delay to good use with the donor.
Just a quick thanks to Kidge (Edgik), who without his sheer determination in getting something off the ground for this for many years, I would be left in New Zealand unable to get any kit built because of frontal impact regs. So Edgik - Cheers

See attached photos, 1999 2.8 Z3 (i know it has 3.0 on the back and no one has any history why)

Basic Plan for the kit will be:

No badges so we are not doing a replica, apart from possibly a custom "Ferrari-esque" Badge on the rear and maybe a couple of "disegno di Pininfarina" on the side as a homage to the great man and the work he did with Scaglietti. The car will be a homage to the era, not a replica.

Intended at present to be Coupe, metallic grey/gun metal with grille and chrome ornaments such as bullet mirrors, bumpers, clear front indicators, teardrops on the side and round taillights.
Interior will remain reasonably stock as I have lucked in with a beautiful black/grey interior with wood effect console, chrome trim on the gauges and good spec in electric condiments and side airbags etc. Will show pictures when I get more underway. Wooden rim steering wheel will eventuate.

Final trappings will lay 4 pipe exhaust underneath "with the required orchestra" and wire wheels and appropriate rubber. I am hoping to keep the donor originals whilst I am running round "in work and in primer" (As they are nice already), when the BMW centre's disappear. I will need a bit of time in the primer coat to normalise the "green" fibreglass and get all the residual stresses and cracking out from the bolt/bonding process and the New Zealand UV rays out. Not going to be happy with a few $K's of paint having cracks in it after a few months!

Looking forward to keeping you all in the loop with this. You are more than welcome to pay me a visit during the build, UBER fare though may be a bit restrictive for you though!

Cheers - Here we go!
Good luck with your build. Will be interesting to see your take on the final look of the car. Good idea not to paint until it has all settled down.
Reply With Quote
  #11  
Old 14th September 2017, 08:36
NeilF355's Avatar
NeilF355 NeilF355 is offline
Senior Member
 
Join Date: Sep 2011
Location: Teesdale
Posts: 114
NeilF355 is on a distinguished road
Default

Quote:
Originally Posted by Welshkiwi View Post
Have the headlight covers already, just need to put some time into door handles and rear tailights/side repeaters as the "main trouble" bits. Cheers Mark.
Hi Mark
Have you considered the Lancia Stratos / Fiat 850 & 1100 rear lights?
They have a rectangular centre reflector rather than the round one on the original as the only difference and I have seen pictures of original 275s with these lights fitted.
Good luck with the build.
Neil
Reply With Quote
  #12  
Old 14th September 2017, 09:01
Welshkiwi Welshkiwi is offline
Junior Member
 
Join Date: Aug 2017
Location: Auckland, New Zealand
Posts: 26
Welshkiwi is on a distinguished road
Default

Hi Neil, yup been scouring those types as well as a few alternatives such as BMW 2002 and some more modern repurpose ideas. Thanks for the hints.
Just managed to secure clear front indicators, Fiat 500d, with alloy rims.
Hopefully a good size for the kit when it turns up.
Currently thinking Morris Oxford boot hinges as they are about 10" in length so should be a good size on the back panels.
Cheers for all the good wishes guys, really looking forward to getting stuck into this build and making sure I do it right.
Reply With Quote
  #13  
Old 17th September 2017, 08:10
Welshkiwi Welshkiwi is offline
Junior Member
 
Join Date: Aug 2017
Location: Auckland, New Zealand
Posts: 26
Welshkiwi is on a distinguished road
Default

Hi guys quick update. Parts are coming along. Picked up Fiat 850/lancia stratos style lights with surrounds today. - from ricambio in Wallington, London. Won't see them until Chris/Dan decide to show as they are going straight to them. Not the cheapest option, but when you want a certain look for the car, it is hard to deviate too far away from original style. Fingers crossed they do the business. Still looking for side repeaters in a teardrop style. Possibly fiat may be an option. Also scouring for door handles. Cheers M.
Reply With Quote
  #14  
Old 17th September 2017, 08:41
casamolino casamolino is offline
Senior Member
 
Join Date: Dec 2012
Posts: 287
casamolino is on a distinguished road
Default

Morning , these are what i have used ,

http://www.ebay.co.uk/itm/Seitenblin...sAAOSwbqpTxERK

would they be suitable for you? Geoff .
Reply With Quote
  #15  
Old 17th September 2017, 09:07
Welshkiwi Welshkiwi is offline
Junior Member
 
Join Date: Aug 2017
Location: Auckland, New Zealand
Posts: 26
Welshkiwi is on a distinguished road
Default

Thanks for that Geoff....
They look the business. You may have just allocated more of my budget! Cheers Mark.
Reply With Quote
  #16  
Old Yesterday, 07:40
Welshkiwi Welshkiwi is offline
Junior Member
 
Join Date: Aug 2017
Location: Auckland, New Zealand
Posts: 26
Welshkiwi is on a distinguished road
Default

Epic fail with the bambina 500d indicators. The supplier said "not new" will need a polish. More like: need retention studs unseizing and straightened, supply of lense screws, Bakelite cracked and missing in terminals, bulbs seized in holders etc, etc. Guy has been good and heading back to him but early lesson learned. Buy new! Choose wisely!. There is only so much that can be brought back to life...
Reply With Quote
  #17  
Old Yesterday, 07:58
Jaguartvr's Avatar
Jaguartvr Jaguartvr is offline
Senior Member
 
Join Date: Jan 2014
Location: Egham, Surrey
Posts: 979
Jaguartvr is on a distinguished road
Default

Nearly everything that I bought "cheap" has been replaced.
Some things however are best bought 2nd hand.
Most of the new chrome items have started showing signs of rust and have been returned. I bought a set of "new old stock" door handles and they are still as good as new. Good old chrome is much better than new chrome.

Have a look here for lights
http://www.superformance.co.uk/360/lights.html

I used the same indicators as Casamolino, look great and I think they are stainless steel. No rust yet!

Last edited by Jaguartvr; Yesterday at 08:03..
Reply With Quote
  #18  
Old Yesterday, 08:21
Welshkiwi Welshkiwi is offline
Junior Member
 
Join Date: Aug 2017
Location: Auckland, New Zealand
Posts: 26
Welshkiwi is on a distinguished road
Thumbs up

Quote:
Originally Posted by Jaguartvr View Post
Nearly everything that I bought "cheap" has been replaced.
Some things however are best bought 2nd hand.
Most of the new chrome items have started showing signs of rust and have been returned. I bought a set of "new old stock" door handles and they are still as good as new. Good old chrome is much better than new chrome.

Have a look here for lights
http://www.superformance.co.uk/360/lights.html

I used the same indicators as Casamolino, look great and I think they are stainless steel. No rust yet!
Thanks fella, I certainly will have to balance between vintage, tired and NOS/NNS. Good to hear you went that way with the indicators. Have been looking at superformance, will have to dive in a bit deeper with the credit card! Cheers for the good advice.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +0. The time now is 09:29.

copyright © madabout-kitcars.com 2000-2014
terms and conditions | privacy policy