Pilgrim Bulldog Project - HELP Please.

[Hot Rod Fan]

Hi. Can anyone tell me If it is possible to use my Pilgrim Bulldog body on a MGB GT or Triumph Herald donor. Thank You.

[redratbike]

MGB is a monocoque so no separate chassis

Herald is 90"wheelbase...has a separate chassis so measure yours for track and wheel base and see if it is compatible.

I worried you are trying to find a chassis for your car without narrowing it down to cars with the correct wheel base
I.e. Wheel centre to wheel centre. From front to back.

[Hot Rod Fan]

Thank You Red rat bike Hi. Once again thanks for your advice.I had wondered if anyone had previously had either project and to see the possibilities.Thank You.

[redratbike]

Originally Posted by Hot Rod Fan

Thank You Red rat bike Hi. Once again thanks for your advice.I had wondered if anyone had previously had either project and to see the possibilities.Thank You.

google is your friend

find the wheelbase and track of your kit then go searching for cars with similar wheelbase and track and seperate chassis

mm inches
Wheelbase 2438 96
Track/tread (front) 1320 52
Track/tread (rear) 1320 52

you have to put a bit of groundwork in if you want to progress

[Hot Rod Fan]

Thank you

[redratbike]

i take it thats yours for sale on ebay?

[Hot Rod Fan]

Hi. Yes, the project was too much for me.Thanks for all your advice Regards