Are you madabout kit cars      
 "We've Got Kit Cars Covered" Information about Madabout-Kitcars.com Contact Madabout-Kitcars.com         Home of UK kit cars - madabout-kitcars.com Various kit car write ups All the latest kit car news Kit car related and general discussion

Search
Manufacturers
Kit Cars
Kit Car Data sheets
Picture Gallery
SVA Knowledgebase
Clubs & Communities
Build cost estimator
Kit cars for sale
Knowledge Base 
KitcarUSA.com
Classic-Kitcars.com
 

Go Back   Madabout Kitcars Forum > Mad Build Area > Marlin Sportster, Cabrio, Berlinetta and Roadster builds

Marlin Sportster, Cabrio, Berlinetta and Roadster builds Enthused or Confused about your vintage Marlin build? Ask away here or show off your build.

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 19th August 2014, 09:29
wasz wasz is offline
Junior Member
 
Join Date: Aug 2014
Posts: 6
wasz is on a distinguished road
Default Marlin Cabrio compression strut conversion

We have a pinto powered Marlin cabrio that hops over bumps in the road at the front and front suspension feels very stiff.

It runs AVO V 974 adjustable coilovers and I've calculated the the springs to be 145lb/ft each which seems to be in spec.

However it is running the massive anti roll bar setup from the Sierra and I suspect it is that causing the front end to hop about.

I understand from elsewhere that Sierras had a number of different size ARBs and some people fit the smaller 24mm one from the P100 which might go someway to resolving the issue. I will try and find one of those....

However I've also heard of "compression struts" designed for the Sierra to do away with the roll bar completely for fully independent suspension (since the cabrio is so light, does it need a roll bar?).

If I wanted to fit these to the cabrio, they they just bolt up to the ARB mounting points? Is anything else needed?

Can I just buy these and bolt them on?

http://www.burtonpower.com/parts-by-...rra-mp593.html

I saw on the owners club forum some people had to cut them down by 10mm. Is that all that would be required?

Anyone got experience?

Thanks!
Reply With Quote
Available from eBay
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +0. The time now is 00:02.

copyright madabout-kitcars.com 2000-2019
terms and conditions | privacy policy