Wiper Assembly

marlinturbo · #1 2nd September 2005, 08:33

Hi people,

Why oh why didn't I keep the wiper arm and blade from my donor?

Does a Front Wiper Arm and Blade assembly from a P Reg 216 etc fit...or should I get a specific model arm and blade assembly?

John
MarlinTurbo

holgate86 · #2 2nd September 2005, 20:45

Hi John,
i used rear wiper arm from 214 and a blade that cleaned largest area of screen without catching edges. Brian

tony-g · #3 3rd September 2005, 09:48

hi all

one area I was looking at was using the rear wiper arm off a non bubble back 200 but using the new type of flat wiper blade off modern passats and toyota's. I have been told they work very well with a curve screen with a single arm as theyadapt to the shape of the screen and wipe very well in both directions.

all the best tony g

marlinturbo · #4 7th September 2005, 09:07

Brian,
Thanks for the info, saw a 214 at the scrappies but the rear wiper arm had been removed...doh. I've just fitted a passenger side arm from a 420 gsi M Reg and that seems to fit well.

NOTE, that the tapered splined holes vary in diameter between model years!

HTH people.

Cheers

John
MarlinTurbo