Are you madabout kit cars      
 "We've Got Kit Cars Covered" Information about Madabout-Kitcars.com Contact Madabout-Kitcars.com         Home of UK kit cars - madabout-kitcars.com Various kit car write ups All the latest kit car news Kit car related and general discussion

Search
Manufacturers
Kit Cars
Kit Car Data sheets
Picture Gallery
SVA Knowledgebase
Clubs & Communities
Build cost estimator
Kit cars for sale
Knowledge Base 
KitcarUSA.com
Classic-Kitcars.com
 

Go Back   Madabout Kitcars Forum > Mad Build Area > Sammio Builds and discussions

Sammio Builds and discussions Sammio bodied car builds and specials

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 22nd July 2014, 13:16
micky1mo's Avatar
micky1mo micky1mo is offline
Senior Member
Enthusiast
 
Join Date: Dec 2006
Posts: 1,130
micky1mo is on a distinguished road
Default Sammio/ribble the next chapter

I will soon be the proud guardian of the SAMMIO/RIBBLE marque.

I would not be able to do this with out the blessing of Andy, the help of Chris at Tribute and of course Lloyds bank

Gary started it, Andy improved it so I am (with the help of Chris) going to carry on this upward trend.
The bodies have alway been resonable and value for money but it could be so much more with an investment of time and money.
We all know the efforts Andy and Mac put into the Navigator.

The Ribble Colani and the Ribble Pilot CV will cease production.
The G-46 is being reviewed but the Pilot and Navigator will continue for now but will be replaced with a single kit sold in a LWB form for the Herald, a SWB form for the Spitfire, a bonnet for a 4 cylinder engine and a bonnet for a 6 cylinder engine, keeping it all simple.

The first thing to be addressed it the schuttle panel (the bit the windscreen sits on) on both the Pilot and navigator as it's off center and needs sorting out. On this note if theres enought interest we will make a "repair" panel available.
The main improvment will hopefully be the addition of a fiberglass inner floor/rear baulkhead for the LWB Herald version improving the build time and a better finished look.

In the next few week we will be releasing a new Kit the "A1 ALPHA" designed for the Triumph Spitfire, we have the buck and the mould are being done as we speak, so all we have to do is build the prototype. Some pre-production photos and infomation will be listed later along with a build thread.

This will be followed by a whole new SAMMIO SPYDER .

Things are still very much "in the air" and it will take a while to settle down but when we finaly take full control the name will revert back to THE SAMMIO MOTOR COMPANY.

We are based in Swindon, Wiltshire.
10 min from J16,M4. We have a large kettle, plenty of Hob-Nobs and are always up for a chat .
Reply With Quote
Available from eBay
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +0. The time now is 01:46.

copyright © madabout-kitcars.com 2000-2024
terms and conditions | privacy policy