sammio num's

[phil9]

hi just to help with sammio numbers i think my 2 are 10 and 11 we are up in kings lynn and the car [green one with 2.5 engine] car 2 half done blue will be on road june by the way green car wheel size is 185 70 14 ...have been going to chat with you guys for a while, but now have a bit of time so here i am

[tlrtone]

hello Phil, and welcome (back?!)

I am sure Davecymru will update the register accordingly....

Was one just not enough and so you decided on having 2? I must admit I am halfway through my first and I am already thinking about a Cordite!

[phil9]

go for it green car is mine blue one is for my mate barry ,as i am the builder i had to have no 1

[Mister Towed]

Hi Phil, really like your car especially the soundtrack in the last few seconds of the youtube video when you open it up.

I'm surprised I haven't seen you out and about in it yet, I'm just up the road in Downham Market and I quite often pop into Lynn.

Did you have any clearance issues with the 185/70/14's or did they just bolt straight on?

Anyway, good luck getting your mate's car on the road, is that getting a straight six too?

[phil9]

hi nice to here from you,..no clearance issues as 185 70 14 are 1in smaller then 175 80 14s but have now changed to 175s as better gearing.. as you live up the road you have to pop over as we are at west winch and yes barrys car is a six with trip/weber.s how yours coming.. if there is any think i can help with regeads phil.

[Mister Towed]

Originally Posted by phil9

yes barrys car is a six with trip/weber.s

Sounds great and I bet it, erm, sounds great...

We'll have to meet up and compare cuts and grazes. I'm back to work tomorrow - I work a pattern of six on four off - but I'll pm you my details. We'll have to get PsychoPops on board too so we can have the first unofficial East Angular* Sammio gathering (*copyright Jade Goody's estate).

As for my build it's going slowly but satisfyingly surely. I've spent the last two days fabricating a fan shroud and mounting brackets for my Honda 'toast slice' radiator. It should've been a straightforward job but I didn't have enough sheet metal to make it in one piece so I had to make it in bits and weld them all together. Should get that finished today so I'll post some pic's once it's done.

Glad to hear that the 175/70/14's fit without fouling, I ordered a set of innertubes yesterday to fit that size and will be ordering the tyres as soon as they arrive.

Bye for now and I'm really looking forward to seeing your Spyder in the flesh.