Are you madabout kit cars      
 "We've Got Kit Cars Covered" Information about Madabout-Kitcars.com Contact Madabout-Kitcars.com         Home of UK kit cars - madabout-kitcars.com Various kit car write ups All the latest kit car news Kit car related and general discussion

Search
Manufacturers
Kit Cars
Kit Car Data sheets
Picture Gallery
SVA Knowledgebase
Clubs & Communities
Build cost estimator
Kit cars for sale
Knowledge Base 
KitcarUSA.com
Classic-Kitcars.com
 

Go Back   Madabout Kitcars Forum > Mad Build Area > Tribute Automotive Builds

Tribute Automotive Builds Discuss your Tribute kit build

Reply
 
Thread Tools Display Modes
  #1  
Old 18th January 2020, 17:19
Lucky@LeMans Lucky@LeMans is offline
Senior Member
 
Join Date: Aug 2012
Posts: 2,142
Lucky@LeMans is on a distinguished road
Default Best Bonnet Stay For Z3 Cars

Has anyone come up with a good solution for their bonnet stay / strut etc ?

The front end on the Z3 based cars is too heavy for the standard gas struts. I would prefer to fit an old style bonnet stay.

What works best ??
Reply With Quote
Available from eBay
  #2  
Old 18th January 2020, 18:29
Hughandjen Hughandjen is offline
Senior Member
 
Join Date: Aug 2018
Posts: 210
Hughandjen is on a distinguished road
Default

I’m interested in this item too. I bought some extra strong struts as recommended on here but they are about an inch too long. I have to find a way of compressing the struts prior to installing in the car. Using original with a strut may be easier
Reply With Quote
  #3  
Old 18th January 2020, 20:45
DaveP DaveP is offline
Senior Member
Enthusiast
 
Join Date: Jun 2015
Location: Reading, Berkshire
Posts: 688
DaveP is on a distinguished road
Default

I used heavier duty gas struts on my Kobra from SGS. No need for an additional bonnet stay as they go up nicely. The ones I bought are strong enough for a 250 bonnet I believe. I can look out the spec if needed.

Dave
Reply With Quote
  #4  
Old 18th January 2020, 21:16
Hughandjen Hughandjen is offline
Senior Member
 
Join Date: Aug 2018
Posts: 210
Hughandjen is on a distinguished road
Default

Quote:
Originally Posted by Hughandjen View Post
I’m interested in this item too. I bought some extra strong struts as recommended on here but they are about an inch too long. I have to find a way of compressing the struts prior to installing in the car. Using original with a strut may be easier
I’ve googled it and a ratchet strap looks like a useful solution
Reply With Quote
  #5  
Old 18th January 2020, 21:21
molleur molleur is offline
Senior Member
 
Join Date: Jun 2015
Posts: 1,401
molleur is on a distinguished road
Default

Quote:
Originally Posted by DaveP View Post
I used heavier duty gas struts on my Kobra from SGS. No need for an additional bonnet stay as they go up nicely. The ones I bought are strong enough for a 250 bonnet I believe. I can look out the spec if needed.

Dave
please do, and post.

Thanks Dave
Reply With Quote
  #6  
Old 18th January 2020, 22:32
DaveP DaveP is offline
Senior Member
Enthusiast
 
Join Date: Jun 2015
Location: Reading, Berkshire
Posts: 688
DaveP is on a distinguished road
Default

Quote:
Originally Posted by molleur View Post
please do, and post.

Thanks Dave
Will do Jack (it is Jack isn’t it?). Was a little while ago so will dig.

Dave
Reply With Quote
  #7  
Old 18th January 2020, 23:13
molleur molleur is offline
Senior Member
 
Join Date: Jun 2015
Posts: 1,401
molleur is on a distinguished road
Default

Quote:
Originally Posted by DaveP View Post
Will do Jack (it is Jack isn’t it?). Was a little while ago so will dig.

Dave
Yep. Thank you Dave. No big hurry.
Reply With Quote
  #8  
Old 19th January 2020, 09:35
WorldClassAccident WorldClassAccident is offline
Senior Member
 
Join Date: Nov 2011
Posts: 3,558
WorldClassAccident is on a distinguished road
Default

These detail from the struts I fitted to the Z300S. It has the longest bonnet of all so if these hold my bonnet up they should work fine for anything else

SGS Engineering
£43.94 2 x GSV10-300 Adjustable force gas strut
£0.00 2 x B3 10mm angled plastic ball socket
£0.00 2 x e10 8mm hole 5mm thick M8 1.25 thread eyelet
£5.30 1 x carriage
Reply With Quote
  #9  
Old 19th January 2020, 09:45
Hughandjen Hughandjen is offline
Senior Member
 
Join Date: Aug 2018
Posts: 210
Hughandjen is on a distinguished road
Default

Quote:
Originally Posted by WorldClassAccident View Post
These detail from the struts I fitted to the Z300S. It has the longest bonnet of all so if these hold my bonnet up they should work fine for anything else

SGS Engineering
£43.94 2 x GSV10-300 Adjustable force gas strut
£0.00 2 x B3 10mm angled plastic ball socket
£0.00 2 x e10 8mm hole 5mm thick M8 1.25 thread eyelet
£5.30 1 x carriage
Did you have to cut away any of the mounting bracket to fit these. I say this as I ordered some from SGS. They sent GSV10-150 struts and they are longer and thicker than the BMW ones. I sent them back to SGS saying they didn’t fit and they said they don’t have a set suitable for a Z3 bonnet bracket and returned them!! I am going to have to try and get them to fit!!
Reply With Quote
  #10  
Old 19th January 2020, 10:38
Jaguartvr's Avatar
Jaguartvr Jaguartvr is offline
Senior Member
 
Join Date: Jan 2014
Location: Egham, Surrey
Posts: 1,780
Jaguartvr is on a distinguished road
Default

For those too lazy to go back and look

http://www.madabout-kitcars.com/foru...ead.php?t=5907

The replacement struts should be the same length as the originals although they are a little thicker. If they are longer they are wrong which I'm afraid doesn't seem unusual for SGS.
I ordered a replacement boot strut for the Daytona and gave them the measurements but the replacement was a foot longer, they did, however, supply a replacement with no arguing.
Reply With Quote
  #11  
Old 19th January 2020, 11:01
Lucky@LeMans Lucky@LeMans is offline
Senior Member
 
Join Date: Aug 2012
Posts: 2,142
Lucky@LeMans is on a distinguished road
Default

Thanks for posting that link Steve. It takes a bit of searching trying to find an old thread, easier to ask ! I didn't know about LandRover springs, that answers another question, thanks !
Reply With Quote
  #12  
Old 19th January 2020, 21:46
WorldClassAccident WorldClassAccident is offline
Senior Member
 
Join Date: Nov 2011
Posts: 3,558
WorldClassAccident is on a distinguished road
Default

I think mine fitted but I normally have a hammer or axe nearby so there may have been some adjustment needed.
Reply With Quote
  #13  
Old 20th January 2020, 08:06
DaveP DaveP is offline
Senior Member
Enthusiast
 
Join Date: Jun 2015
Location: Reading, Berkshire
Posts: 688
DaveP is on a distinguished road
Default

I bought the same struts as WCA and they fitted straight on the kobra with no issues.

I cannot find the bl**dy SGS invoice though. I did get the chance to clear my email of all their fricken marketing mails which was a bonus.

Dave
Reply With Quote
  #14  
Old 20th January 2020, 14:55
molleur molleur is offline
Senior Member
 
Join Date: Jun 2015
Posts: 1,401
molleur is on a distinguished road
Default

Quote:
Originally Posted by DaveP View Post
I bought the same struts as WCA and they fitted straight on the kobra with no issues.

I cannot find the bl**dy SGS invoice though. I did get the chance to clear my email of all their fricken marketing mails which was a bonus.

Dave
Got the info, thanks Dave!
Reply With Quote
  #15  
Old 21st January 2020, 00:21
Egdik Egdik is offline
Senior Member
 
Join Date: Jul 2014
Location: Herts
Posts: 148
Egdik is on a distinguished road
Default Struts

On the GTB we fitted stronger struts of the GSV - 150 / 10mm piston size.

They need quite a lot of fettling to shorten and to fit; little space & no pleasure.

SGS can be unfriendly to deal with, but the market place is limited.

The GTB bonnet is long and includes the headlights. It is not kept up by these struts, but they do make it easier to raise.

To prop the bonnet up, cut a fifth or so lengthwise out of an aluminium tube to fit over the piston, thus holding the bonnet at your chosen height. This is Andy's discrete idea, which works well.

Can be lined with a little bicycle inner tube and file a groove in the bottom end to rest on the ball joint shank.


bonnet strut prop.jpg
Reply With Quote
  #16  
Old 21st January 2020, 16:51
Hughandjen Hughandjen is offline
Senior Member
 
Join Date: Aug 2018
Posts: 210
Hughandjen is on a distinguished road
Default

I’m wondering if I should send mine back again and ask for GSV10 300 as they sent me GSV 10 150. Do you know if the 300 has a narrower piston size as mine are too wide
Thanks
Hugh
Reply With Quote
  #17  
Old 21st January 2020, 18:08
Egdik Egdik is offline
Senior Member
 
Join Date: Jul 2014
Location: Herts
Posts: 148
Egdik is on a distinguished road
Default Strut sizes

Hugh

Take a close look at the SGS website which gives some struts dimensions. The '150' means a stroke length of 150mm.

SGS do not give the dimensions for the standard Z3 replacement. The standard unit is 345mm from middle of eye to middle of socket, with a 150mm stroke and a cylinder diameter of 18mm; piston 8mm.

GSV10-300 will have a very long stroke of 300mm and the unit is 650mm . . . plus the eyes / sockets. The cylinder is 22mm. So it is far too long for a Z3 bonnet hinge fitment.

A GS 14 150 has a 27mm body

I fitted the 10 - 150 units and they needed quite some adjusting to fit ok on the GTB, where space seemed tight. The cylinder body is 22mm, piston 10mm, length is 350 PLUS eyes / sockets - so significantly longer than standard. I shortened the piston and cut a new thread.
Reply With Quote
  #18  
Old 21st January 2020, 19:10
Lucky@LeMans Lucky@LeMans is offline
Senior Member
 
Join Date: Aug 2012
Posts: 2,142
Lucky@LeMans is on a distinguished road
Default

At the moment I'm thinking of retaining the standard Z3 struts and using a prop of some sort. The front of the 275 with valance, stainless bumpers and grill is significant. I'm worried the hinged end of the bonnet structure could be stressed excessively. At least when using a prop some of the weight is taken at the front end.
Reply With Quote
  #19  
Old 21st January 2020, 22:29
Hughandjen Hughandjen is offline
Senior Member
 
Join Date: Aug 2018
Posts: 210
Hughandjen is on a distinguished road
Default

Quote:
Originally Posted by Lucky@LeMans View Post
At the moment I'm thinking of retaining the standard Z3 struts and using a prop of some sort. The front of the 275 with valance, stainless bumpers and grill is significant. I'm worried the hinged end of the bonnet structure could be stressed excessively. At least when using a prop some of the weight is taken at the front end.
I think you have a point there. Putting too much stress on the fibreglass May cause future problems
Reply With Quote
  #20  
Old 22nd January 2020, 09:59
Jaguartvr's Avatar
Jaguartvr Jaguartvr is offline
Senior Member
 
Join Date: Jan 2014
Location: Egham, Surrey
Posts: 1,780
Jaguartvr is on a distinguished road
Default

My Daytona has a very heavy bonnet with a metal frame as well, normal stays would not hold it up. It has gas struts with locks, open the bonnet and it will "click" when fully open, to close lift it a little higher and it will "click" again allowing it to close. I have been told that these locking gas struts were fitted to early Range Rovers (P38?).
May well work for the heavier 275 bonnet.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +0. The time now is 07:32.

copyright © madabout-kitcars.com 2000-2024
terms and conditions | privacy policy