I am selling my original motorsport specification (apparently double the strength of OEM shafts) axle bars, suitable for a Marlin 5EXI-R fitted with Marlin's suspensions arms.
The reason I am selling these, is that my rear suspension is massively different to what it was as supplied from Marlin, and now my driveshafts need to grow / shrink in a different dynamic to what was previously the case. At approaching full bump, these axle bars *just* bottom out in the gearbox cups with my current suspension setup.
I ran these axle bars for approaching 3000 miles with no trouble, prior to the mods on my car. They are in perfect condition and are hideously expensive new (I have been quoted near £500 for the replacement pair). The axle bars were made by http://www.driveshaft.co.uk/contact.cfm
These bars can be yours for a relatively cheap £200.
If you're interested, let me know.